Jenn-Air Wall Oven Seals and Gaskets

Videos!

Your Price

$87.39

Jenn-Air Wall Oven Door Gasket

★★★★★

15 Reviews

PartSelect Number PS11749287

Manufacturer Part Number WPW10162384

The oven door gasket on your range functions as a seal between the warm interior of your oven, and the outside. It prevents heat from fleeing your oven when the door is closed. Before making any repairs to your oven you should make sure to wear work gloves to protect your hands, and give your oven time to cool. The only tool you will need to make this repair is a pair of needle nose pliers. This oven door gasket comes with built in retaining clips; if any retaining clips from your old gasket are left in the oven make sure to remove them before installing your new gasket.

Fixes these symptoms

Door won’t close
Little to no heat when baking
Oven is too hot
See more...

Installation Instructions

Lori from Scottsdale, AZ

Needed to replace oven door gasket.

First removed the old gasket using a needle-nose pliers. Then placed new gasket by inserting the little clips on the gasket. Took 5 minutes. Great instructions from Repair Forum. Read more...

Your Price

$127.31

Jenn-Air Wall Oven Oven Door Seal

★★★★★

5 Reviews

PartSelect Number PS11757564

Manufacturer Part Number WPY702338

This oven door seal prevents heat from escaping the oven cavity when in use.

Fixes these symptoms

Little to no heat when baking
Oven not heating evenly
See more...

Installation Instructions

Paul from Mickleton, NJ

The oven door seal was ripped and was leaking.

The oven seal replacement was very straight forward. Two screws held the door to the arms coming from the oven. I slid the door up off the arm and moved it to a workbench. This whole process should take about 15 minutes, a little longer if your unit is older and you want to clean as you go. Mine was fairly dirty and I gave it a cleaning as I removed parts. Unscrew all screws on the outer frame of the door, including two small ones on the side. Remove the outer frame and then the glass front and set them aside. A few more screws to remove the glass from the inner door, and even more on the remaining part of the door. You should also remove the screws holding the tiny brackets as well to release the portion that holds the oven seal in place. This is very straightforward, just keep pulling screws out until you can remove the old seal.

Once the old seal is out, insert the new one using the wire embedded in the seal as your guide...the gap in the seal goes to the bottom. Put everything back together and re-install the door. My door hinges were spring loaded and took a little effort to move them down so the door can be slipped on. This is a two person job since the hinges do not lock in place, they spring right back up flush with the oven and you cannot install the door. Re-install the two set screws holding the door to the hinges and you are done!

With the new seal in place, it felt a little puffy and the door did not seem to close as flush as it used to. This makes sense since the seal is new. I kept the door locked (like you would to use the oven cleaning cycle). I even kept it partially locked during cooking.

Frankly, the hardest part was the cleanup of nasty grease and dirt that built up over the past decade or so.

Best of luck! Read more...

Your Price

$127.07

Jenn-Air Wall Oven Oven Door Seal

★★★★★

1 Review

PartSelect Number PS11743839

Manufacturer Part Number WP701650

This oven door seal is twenty-one inches wide. This woven style door gasket is gray in color.

Installation Instructions

Rosemary from Pawleys Island, SC

seal was black and stiff from burned in spilled grease and sauce

Unscrewed and pulled the door off and then took the three layers of the door apart in order to clean off the burned-on goop and remove the old and insert the new seal. The last screw was rusted in and the drill stripped it so that it was impossible to remove. I levered the remaining two layers apart, holding them open with screw drivers, and inserted the new seal. Had to be careful with the shaping of the metal core of the seal and the distribution of the sealing fabric. Phew! I saved the screws from each layer separately by taping them to the counter in the order of removal. This made reassembly easier. Getting the door back on was a bit difficult and I needed another pair of hands to help me. Read more...

Videos!

Your Price

$102.90

Jenn-Air Wall Oven SEAL- DOOR

★★★★★

6 Reviews

PartSelect Number PS11743859

Manufacturer Part Number WP71001841

This oven door gasket prevents heat from escaping the oven cavity when in use. This is a very easy repair that should only take a few minutes. The door gasket may damage or rip over time due to repeated use. If you notice that hot air is escaping from your oven, it is likely that the gasket needs to be replaced. You will need to open the oven door and remove the old seal by pulling it out of place with your hands. The old gasket will be secured with clips that will come out when you pull the entire piece out. The new gasket will have hooks all along the rim, which will line up with the oven door. Simply line up the hooks and push into place outlining the door of the inside of the oven. No tools required.

Fixes these symptoms

Door won’t close
Oven not heating evenly
See more...

Installation Instructions

cheryl from dolores, CO

oven door gasket was no longer flexible, but stiff

pulled out the old door gasket, it had little diamond-shaped clips, pulled out really easily, replaced with the new gasket. All the clips fit into the proper holes, stuffed the new ends where the old ones were. Perfect. less than 10 minutes. Thanks.... Read more...

Your Price

$111.65

Jenn-Air Wall Oven Door Gasket

★★★★★

3 Reviews

PartSelect Number PS11743865

Manufacturer Part Number WP71001970

This gasket prevents heat from escaping the oven cavity when in use. It contains all of the attaching clips needed for installation.

Installation Instructions

Daniel from Rochester Hills, MI

Oven door would not close tightly.

DOOR HINGE: Lifted the door out of place and layed it on the floor. Removed the six screws (three on top and three on bottom) from the door to remove the front panel exposing the hinges. Removed three screws from each hinge to remove them. Reversed the process to complete. HINGE BRACKET: Would recommend replacing these with hinges. After removing the screws that hold the oven in I pulled the oven out about four inches. Brackets are now easily removed and replaced, two screws each. Slide the oven back resecure and your done. DOOR GASKET: Just pulled it out and snapped in the new. Read more...

Your Price

$105.35

Jenn-Air Wall Oven Door Gasket with Clips

PartSelect Number PS11749289

Manufacturer Part Number WPW10162386

Installation Instructions

Gisele from Miami, FL

Heat distributed unevenly in oven.

Removed old seal by pulling each little metal prongs out from holes in door frame, then positioned new seal by inserting its prongs into holes in door frame, making sure seal is sitting right in place. Read more...

Your Price

$8.73

Jenn-Air Wall Oven SEAL-STRIP

PartSelect Number PS11746321

Manufacturer Part Number WP854334

Installation Instructions

Jimmy from Stratford, TX

The coils would freeze up and it wouldn't cool.

I removed the screws on the covers and remove them, then taken the screws from the timer, the temperature control just set in there, then pulled out a lttle ways and disconnected the wires and then removed. Installed the new ones. I taken the back panel off and removed the clip and pulled the defrost heater out a ways and removed the wires and removed the defrost heater. Installed the new defrost heater and clip and the covers. Read more...