Genuine OEM Pressure Washer Parts

Your Price

$4.99

Pressure Washer Male Adapter

PartSelect Number PS10020893

Manufacturer Part Number 9.134-019.0

Your Price

$13.47

Pressure Washer Wheel

PartSelect Number PS16324400

Manufacturer Part Number 308451067

Detergent Suction Kit – Part Number: 308452002

Your Price

$5.19

Pressure Washer Detergent Suction Kit

★★★★★

1 Review

PartSelect Number PS9938134

Manufacturer Part Number 308452002

This detergent suction kit, also known as a soap or chemical injection kit, is designed for use with a pressure washer. This is a genuine OEM part designed to inject soap into the water stream of your pressure washer, and includes the main injector valve, two differently sized O-rings, a spring, and a ball bearing. One end of this kit will be threaded into the washer, and the other will lead to your cleaner with a siphon, which is sold separately. This injection kit would need to be replaced if the nozzle is leaking, the injector fails to work properly, or water is getting into the soap dispenser. To replace, simply unscrew the previous injector and remove it, then fit the small O-ring inside the threaded end of the new injector, along with the ball bearing and then spring. Wrap the larger O-ring around the base of the threaded end, and apply a layer of lubricant, before installing the new injector and securing it.

Fixes these symptoms

Leaks water
See more...

Installation Instructions

Duarte from GRISWOLD, CT

Must have froze over winter (stored in garage)

Repair was easy, however had to u tube issue for proper orientation of parts as it did not come with any instructions. Wished I had two as shipping was twice as much as part. Very satisfied. Read more...

Your Price

$4.99

Pressure Washer U Clip

PartSelect Number PS9996200

Manufacturer Part Number 678799013

Your Price

$6.84

Pressure Washer Valve Plug

PartSelect Number PS9948296

Manufacturer Part Number 39-0231

The valve plug goes next to the o-ring. This part is made of metal and is sold individually. It is an authentic Mi-T-M replacement part that is sourced from the original manufacturer for use with pressure washers. It will need to be replaced if it breaks or strips.

Kit, Chemical Inject – Part Number: 192914GS

Your Price

$27.30

Pressure Washer Kit, Chemical Inject

★★★★★

2 Reviews

PartSelect Number PS8911045

Manufacturer Part Number 192914GS

Used to connect the hose that supplies the chemical cleaning solution (soap), this OEM replacement Chemical Injection Kit consists of the brass fittings, a metal ball, a spring, and a rubber seal, and is an exact replacement for various pressure washers. If the cleaning solution will not dispense, it is possible that you need a new Chemical Injection Kit. Inspect it for signs of wear or damage and replace it if needed. This part is known to wear over time. You will need a wrench set to complete this repair. Customers rate this repair as Easy.

Installation Instructions

Carl from ARCADIA, FL

The copper fitting on the chemical injection broke.

I order the part from this site and received it within a week. the only problem was that spring was missing out of the sealed bag. NO PROBLEM!!! I cut a ball point pen spring to fit and everything works just fine. You just have to remember to put the spring in first, then the ball bearing and then the rubber o-ring.If you put them in backwards you pressure will fed directly into your chemical container!! Read more...

Your Price

$4.99

Pressure Washer Outlet Tube

PartSelect Number PS9938530

Manufacturer Part Number 308862003

This OEM outlet tube, also known as a hose connector, allows pressurized water to flow from the pump of your pressure washer to the nozzle. Connecting the hose to the handle assembly and the spray wand, it is where the water exits from your machine so you can direct the stream towards a desired surface. You can tell if an outlet tube is broken when it has visible cracks or holes and when water leaks or sprays from the connection points or along the tube. A damaged or blocked tube can result in a loss of pressure and potentially premature wear or machine failure. To remove the outlet tube, use a wrench set to unscrew it from the pump. Please note that this replacement part is sold separately from the pump assembly.

Fixes these symptoms