Jenn-Air Wall Oven Elements and Burners

Find Your Part

Model number locator Need help finding your model number?
  • Search your model number to find:
  • Genuine OEM parts guaranteed to fit
  • Free manuals and guides
  • Repair instructions and videos
Jenn-Air Appliance Parts
Shop By Part Type

Popular Jenn-Air Wall Oven Elements and Burners

Your Price
$103.52
  In Stock
Jenn-Air Wall Oven Range Bake Element
★★★★★
★★★★★
54 Reviews
PartSelect Number PS11757472
Manufacturer Part Number WPY04000066
The bake element is the heating element that is found at the bottom of the oven and is responsible for 90 percent of the bake heating. This spade style bake element is 16 inches wide, and connects with push-on wire terminals. It has a terminal depth of three inches and a total element length of nineteen inches. You may need to replace the heating element if your oven produces little to no heat, the oven will not heat evenly, or the element will not heat at all. This element comes with an instructions sheet and is intended for use with electric ovens. To see if this part will fit your oven, please check the list of compatible brands below.
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • Oven is too hot
  • See more...
Installation Instructions
DENISE from GERMANTOWN, TN
bottom heating element in oven disintegrated
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. I threw away the old pieces.

Then I connected the two wires on the new element. I pushed the wires back in the insulation in the wall of the cabinet. Then I inserted the two screws and tightened them in.

SUPER EASY!!!!!

This $40 part saved me $1500 on a new double wall oven. Read more...
Videos!
Your Price
$67.36
  In Stock
Jenn-Air Wall Oven Oven Bake Element
★★★★★
★★★★★
52 Reviews
PartSelect Number PS11744014
Manufacturer Part Number WP74003019
This is a 2800 watt, 240-volt Whirlpool oven bake element that is sourced directly from the original manufacturer for stoves, ovens, cooktops, or range ovens. This part should be replaced if the element is not heating, heating unevenly, or is too hot. It has a terminal distance of 16 inches with a terminal depth of 3 inches. Disconnect power to the oven before replacing the bake element. Unscrew the Phillips screws directly above the element brackets to remove the existing element, and remove the wire harness without losing the wires. It is recommended to inspect the wire terminals to ensure they are not arced or burnt while the element is removed.
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • Oven is too hot
  • See more...
Installation Instructions
mike from gold bar, WA
burned in half
put the new element in the oven pushed wire onto connector on element held it up to match holes and put the screws back in, very easy to change. I really like the fast way I receive a part from you. Read more...
Videos!
Your Price
$127.36
  In Stock
Jenn-Air Wall Oven Bake Element
★★★★★
★★★★★
10 Reviews
PartSelect Number PS11752537
Manufacturer Part Number WPW10310258
This bake element for your oven, range, or stove provides heat from the bottom of the appliance to cook or bake your food items. You may need to replace this part if your oven is not heating properly. This bake element is approximately 22 inches wide. Disconnect power to your appliance before completing the repair because you will be working near electrical wiring harnesses. The wiring harnesses feature slip-on terminals for easy installation. Be sure to hold the wiring harness forward so they do not fall behind the panel, as they are difficult to retrieve. This is an authentic OEM bake element.
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • See more...
Installation Instructions
AL from TINLEY PARK, IL
element started sparking and caught on fire
turned off breaker for oven,opened door, removed racks,removed two screws,pulled out the element, dis connected wires,reconnected new element,put back screws,replaced racks,turned breaker on,perfect fit. Read more...
Your Price
$102.32
  In Stock
Jenn-Air Wall Oven Bake Element (16 Inch long x 19 Inch wide)
★★★★★
★★★★★
9 Reviews
PartSelect Number PS11757475
Manufacturer Part Number WPY04100019
This electric oven bake element with screw in wire terminals is 19 inches wide. It has a terminal depth of three inches and a total element length of nineteen inches. This element is intended for use with some electric ovens.
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • Oven not heating evenly
  • See more...
Installation Instructions
John from Corfu, NY
Old element was worn out (burst in line)
First, I cut the power to the stove to be sure no electrical current could be conducted. Next, I removed the two screws that hold the heating element to the back of the stove. Then, I removed the oven racks and slowly slid the heating element out until I could see the wires that attached to it. Because the element has the female end of the wire, I pulled the male ends out of both the left and right side of the element.. This releases the old element and I discarded it. Next, I took the new element, slide the male ends into the new female ends that protruded from both the right and left side of the element. I crimped these slightly with my pliers to make sure that they would stay secure when I pushed the element into place. With the new element securely attached, I slowly slid the element into place, this forces the exposed wires to be retracted out of sight and in the insulated part of the oven. I then took the two screws that I had to removed in the beginning, and used them to fasten this new heating element to the back of the oven. Finally, I turned the power back on and the element worked fine. Read more...
Your Price
$81.74
  In Stock
Jenn-Air Wall Oven Bake Element (19 Inch long x 19 Inch wide)
★★★★★
★★★★★
5 Reviews
PartSelect Number PS11744015
Manufacturer Part Number WP74003020
This electric oven bake element with female spade connections is 16 inches long and 19 inches wide. It has a terminal depth of three inches, making a total element length of nineteen inches.
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • See more...
Installation Instructions
Jim from Placentia, CA
Oven (not broiler) element burned out, no oven heat
Inside the oven, I removed one Phillips screw on each side where the element mounts to the back oven wall. Then disconnected the wire on each side using pliers. Unscrewed glass lens, unscrewed light bulb. Replaced all pieces in reverse order. Took less than 10 minutes. Read more...
Your Price
$102.59
  In Stock
Jenn-Air Wall Oven Broil Element
★★★★★
★★★★★
4 Reviews
PartSelect Number PS11757488
Manufacturer Part Number WPY04100514
Fixes these symptoms
  • Element will not heat
  • Little to no heat when broiling
  • See more...
Installation Instructions
Thomas from St. Paul, MN
Top element was burned out
I removed three screws, pulled the element out from the rear wall, unplugged the electrical connections, reversed these steps in installing the new element. "A Piece Of Cake!" Read more...
Your Price
$105.59
  In Stock
Jenn-Air Wall Oven Bake Element with Screws
★★★★★
★★★★★
7 Reviews
PartSelect Number PS11743929
Manufacturer Part Number WP715269
This bake element is eighteen inches long. Its terminal depth is less than an inch long, and it comes with two screws.
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • See more...
Installation Instructions
Shan'te from Saint Joseph, MI
bake element not working
Our oven is at least 30 years old and the parts are not even available through the manufacture anymore. A new stove would cost well over $1000.00. Jen airr is the only down draft stove available. So the repair was much more affordable that the alturnative. So thank you to part select for providing this service. The repair was simple. This is coming from a 36 year old female who has been around electrical work, but never done any myself. My husband was out of town and I felt I could do the job. I first made sure I had another adult present. I turned off the power to the oven. I then removed the visible screws to the element plate (2 on top and 1 in lower middle). I then pulled the element out enough to get behind the plate and feel the screws that were connecting the wires to the element/ground. Again 3 total. The oven space is very small and difficult to work in. I had to do a lot by feel. Once the old element was free I just exchanged it for the new one and reversed the process, making sure all the wires were tight. I then turned the power back on. Turned the oven on, it smoked lightly for a moment and turned red hot. Over all it was extreemly simple. Read more...
Your Price
$100.30
  In Stock
Jenn-Air Wall Oven Bake Element
★★★★★
★★★★★
7 Reviews
PartSelect Number PS11757476
Manufacturer Part Number WPY04100020
This bake element is 17 inches wide. It has a terminal depth of three inches, and a total element length of ninteen inches. This element is intended for use with some electric ovens.
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • Oven not heating evenly
  • See more...
Installation Instructions
Cecil C. from St. Johns, FL
Old bake element burned out
1. Removed screws and detached push on cannectors
2. Removed old element
3. Pushed eclectrial connectors onto new element and attached new element to oven with screws. Read more...
Your Price
$99.17
  In Stock
Jenn-Air Wall Oven Bake Element
★★★★★
★★★★★
4 Reviews
PartSelect Number PS11757487
Manufacturer Part Number WPY04100388
This bake element is found on the bottom of the oven.
Fixes these symptoms
Installation Instructions
DAVID from ARLINGTON, TX
Burnt Out Element
Removed old element by unscrewing 2 screws, installed new one. Real easy. Read more...
Videos!
Your Price
$150.46
  In Stock
Jenn-Air Wall Oven Broil Element
★★★★★
★★★★★
5 Reviews
PartSelect Number PS11752538
Manufacturer Part Number WPW10310260
This broil element is found on the roof of the oven.
Fixes these symptoms
  • Element will not heat
  • Little to no heat when broiling
  • See more...
Installation Instructions
Sandra from Oklahoma City, OK
Broiler would not heat
replaced broiler element - still would not heat.
Called repairman and the control panel is out and will cost around 200.00 to replace. To replace the element, my son helped as my arms weren't long enough. Removed two screws at back and two screws on front of broiler brace. Pulled out and removed wires and hooked them to the new element. Had to turn off circuit breaker. Pushed element back into the holes and replaced screws.
In this instance, it would have been cheaper had I just called the repairman first. However, I have an extra broiler element in case it goes out again. Read more...

Related Jenn-Air Wall Oven Parts

Back to Top