Craftsman Chainsaw Pumps
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Craftsman Chainsaw Pumps
Your Price
$10.70
In Stock
Craftsman Chainsaw Pump Piston
PartSelect Number PS9028551
Manufacturer Part Number 540057901
It is a high-quality OEM item which is made for Husqvarna and Jonsered chainsaws. The piston is secured inside the cylinder in order to create pressure and push the oil. Over time due to friction and heat, it may wear out or even get damaged eventually requiring a replacement to maintain a properly working oil pump. Note, never use waste oil. This results in damage to the oil pump, the bar, and the chain. It is also important to use oil of the right grade (suitable viscosity range) in accordance with the air temperature. Make sure to refer to the owners manual and the appropriate diagrams of your model for the correct installation of the new part. You will need to use appropriate tools in order to remove the chain, the bar, and the sprocket in order to perform this repair. This pump piston is made of durable materials and is sold as an individual component. Keep in mind, other parts of the oiler mechanism are all sold separately.
Your Price
$12.75
In Stock
Your Price
$15.27
In Stock
Craftsman Chainsaw Pinion
PartSelect Number PS8991514
Manufacturer Part Number 503931801
This pinion is available as an individual replacement part. It fits between the needle bearing and the pump piston. The pinion is made out of metal and plastic and will need to be replaced if it breaks. A screwdriver may be needed when replacing this part. This is an authentic replacement part for chainsaws made by Husqvarna and Jonsered.
Your Price
$12.23
In Stock
Craftsman Chainsaw Oil Pump Kit
PartSelect Number PS16352789
Manufacturer Part Number 530071259
Genuine Poulan replacement part, this part is sold as a kit. The purpose of the 530071259 Oil Pump Kit is to keep the chain saw chain oiled, so it will not burn the teeth or get dull quicker than a well oiled chain would. It also contains complete installation instructions with it.
Your Price
$31.97
In Stock
Craftsman Chainsaw Assembly Oil Pump
PartSelect Number PS9982302
Manufacturer Part Number 581063901
This is an OEM Husqvarna replacement part manufactured for chainsaws. This oil pump assembly is an auto oiler, that sends oil to the clutch drum while the chainsaw is running. The oil pump assembly is sold individually. Additional recommended parts: • Pick Up Assembly Oil Tank, part number: 545069501 • Oil Pickup Elbow, part number: 530049477
Your Price
$34.75
In Stock
Craftsman Chainsaw Oil Pump Kit
PartSelect Number PS16352863
Manufacturer Part Number 530071891
This is an authentic OEM part for use with Poulan and Jonsered Chain Saws. The oil pump kit pumps oil to lubricate the bar and chain. The kit may include multiple parts; refer to your parts diagram for a complete list of parts included. The most common reasons for replacing the oil pump kit is if the bar oil is not reaching the chain the oiler is not pumping the bar oil or the chain gets excessively hot. The oil pump kit includes the pump assembly the spring worm gear and the installation screws. Here is a list of tools that are needed to replace the oil pump kit they are a chain adjustment tool, ratchet/socket, flat-blade screwdriver, small screwdriver, long-nosed pliers, adjustable pliers, clutch removal tool (optional) and an impact driver (optional).
Your Price
$30.58
On Order
Craftsman Chainsaw Oil Pump
PartSelect Number PS16371272
Manufacturer Part Number 581071401
This item has been sourced from the original manufacturer to ensure quality. The oil pump is intended to be used with chainsaws from Poulan. This part is used to pick up oil from the tank, and transfer it to the chain oiler assembly. This item is available as an individual replacement part.
Installation Instructions
William from EVANSVILLE, IN
Worn out oil pump/burning chains
After checking several different videos, ordered the repair parts and two specialty tools( Clutch removal/install and a worm drive remover/installer) Total for parts and tools around 45.00. Much cheaper than the shop wanted, 85.00 to look at it plus parts. As for results I've used the chainsaw all afternoon no problem. Runs like it did 12 yrs ago. Pumps oil the would make Jed Clampet proud
Read more...
Your Price
$41.71
In Stock
Your Price
$10.85
In Stock
Craftsman Chainsaw Oiler Gear 36/41
PartSelect Number PS9004066
Manufacturer Part Number 530029833
This oiler gear 36/41 is supplied directly from the original equipment manufacturer. This threaded metal component is compatible with many chainsaws. The oiler gear is secured onto the plunger and gear assembly, lubricating the chain with oil. This item is sold individually. A screwdriver, hex key and pair of pliers may be of help for making the installation.
No Longer Available
Craftsman Chainsaw Oil Pump Assembly
PartSelect Number PS18527177
Manufacturer Part Number 545165401
This is an authentic Poulan replacement part. The oil pump assembly is designed by the manufacturer for use in chainsaws. This part is made of high-quality plastic and metal, and is used to provide lubricating fluid to the machine. You may require a screwdriver when replacing this part. This item is sold individually.
Related Craftsman Chainsaw Parts
- Craftsman Chainsaw Bearings
- Craftsman Chainsaw Brackets and Flanges
- Craftsman Chainsaw Caps and Lids
- Craftsman Chainsaw Carburetors
- Craftsman Chainsaw Ducts and Vents
- Craftsman Chainsaw Filters
- Craftsman Chainsaw Handles
- Craftsman Chainsaw Hardware
- Craftsman Chainsaw Hoses and Tubes
- Craftsman Chainsaw Knobs
- Craftsman Chainsaw Latches
- Craftsman Chainsaw Motors
- Craftsman Chainsaw Seals and Gaskets
- Craftsman Chainsaw Springs and Shock Absorbers
- Craftsman Chainsaw Starters
- Craftsman Chainsaw Switches
- Craftsman Chainsaw Transmissions and Clutches
- Craftsman Chainsaw Valves
- Craftsman Chainsaw Wheels and Rollers
- Craftsman Chainsaw Wire Plugs and Connectors