Brush Cutter Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Brush Cutter Parts
Your Price
$9.16
In Stock
Brush Cutter Spark Plug
PartSelect Number PS8996057
Manufacturer Part Number 503235111
Compatible with over 150 models of lawn equipment, this Spark Plug has been sourced directly from the original manufacturer. It is sold individually, made of metal and ceramic components, and is not part of a kit or assembly. The spark plug is used to ignite the air-fuel mixture inside the combustion chamber.
You may need to replace the Spark Plug if your 1 cylinder engine won't start, or if your more-than-1 cylinder engine runs rough. Spark Plugs will wear over time and should be inspected regularly.
Customers rate this repair as Easy.
Your Price
$13.74
In Stock
Brush Cutter Chainsaw Fuel Filter
PartSelect Number PS12661913
Manufacturer Part Number 591375401
This is a genuine Husqvarna replacement part, it is sold individually. The Fuel Filter is inside of the fuel tank. Its purpose is to filter out dirt and other debris from contaminating the carburetor. It will at sometime become clogged and restrict the fuel getting to the carburetor,and will have to be replaced. We do have an article and video on How to Replace the Fuel Filters in Your Outdoor Power Equipment.. You can see this by going to the front page of our site and clicking on Repair Center.
Your Price
$12.20
In Stock
Brush Cutter Chainsaw Primer Bulb
PartSelect Number PS9282918
Manufacturer Part Number 503936601
Genuine Husqvarna replacement part, this part is sold individually. The 503939601 Air Purge does just what the part name says. It purges the air out of the carburetor. Then it forces fuel from the fuel tank and fuel line in to the carburetor.
Your Price
$6.40
In Stock
Brush Cutter Fuel Tank Bushing
PartSelect Number PS11824288
Manufacturer Part Number 580457501
Used to seal the fuel tank to prevent leaks and allow the fuel line to enter through it, this Fuel Tank Bushing is sourced directly from the manufacturer. It is made of black rubber, is not part of a kit or assembly, and is sold individually.
This part will wear through regular use and should be replaced if you notice signs of damage or wear. When it malfunctions, you will see fuel leaking from the bushing. You will need a screwdriver and pliers to complete this repair.
Customers rate this repair as Easy.
Your Price
$6.40
In Stock
Brush Cutter Trimmer Filter
PartSelect Number PS9005902
Manufacturer Part Number 530150253
The air filter prevents dirt and debris from entering the engine on your lawn equipment. This is an OEM filter that is white, roughly 2x3.5 inches in dimension, and can only be purchased individually. Made of foam, the air filter becomes clogged and worn over time, causing the engine to run rough from restricted air flow.
You can make this repair easily with no required tools by inserting the new filter inside the air cleaner housing of your engine.
Your Price
$15.27
In Stock
Brush Cutter Fuel Line
PartSelect Number PS9008192
Manufacturer Part Number 530069599
This Fuel Line is a 25-inch, clear, plastic line used to deliver fuel. It requires a screwdriver, pliers, socket set, and nut driver and is rated as "Easy" to install by customers. If the fuel line wear out to the point of breaking, cracks and/or leaking will appear and the part should be replaced. Refer to your make, model and diagram to ensure this is the correct part for you.
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
Steve from SALEM, OH
Broken fuel line
Removed broken fuel line from gas tank. Threaded new line into tank routed it to the carb and cut to length needed. Attached to the carb.
Read more...
Your Price
$6.40
In Stock
Brush Cutter Fuel Line Grommet
PartSelect Number PS16278946
Manufacturer Part Number 13211555931
This is a genuine ECHO/Shindaiwa replacement part It is compatible with over 150 machines listed below. The Fuel Line Grommet is placed into the fuel tank. The Vent tube, Fuel return line and fuel line are inserted through the three holes. A worn Fuel Line Grommet will cause fuel to leak from the tank. When replacing the Grommet it is advisable to replace the fuel lines at the the same time.
Your Price
$55.63
In Stock
Brush Cutter Trimmer Carburetor Kit
PartSelect Number PS9030700
Manufacturer Part Number 545081848
This carburetor rebuild kit (part number 545081848) is for lawn and garden equipment engines.
Carburetor rebuild kit 545081848 includes gaskets and parts for rebuilding the carburetor.
Work in a well-ventilated area and drain the fuel from the tank and fuel lines before rebuilding the carburetor
Your Price
$6.40
In Stock
Brush Cutter Trimmer Hose
PartSelect Number PS9020992
Manufacturer Part Number 537042401
This OEM fuel line, or hose, is a 4-inch, clear, plastic tube which is sold individually. It is rated as "Easy" to install. This part connects to the purge assembly and delivers fuel to the carburetor or is used as a return line to the tank. A broken hose will leak, and should be replaced. Refer to your make, model and diagrams to check if this part is right for you.
Your Price
$7.63
In Stock
Brush Cutter Trimmer Oiled Air Filter
PartSelect Number PS9020811
Manufacturer Part Number 537186301
This ready-oiled air filter is an OEM part that traps dirt and debris, preventing them from entering the engine. This part is black, comprised of foam, and is sold individually. Your air filter may become dirty and clogged over time, and because it is oiled, it is difficult to wash because it is oiled, so it will need to be replaced. A clogged air filter will cause your engine to run rough from restricted air flow.
This is an easy repair to make and does not require any special tools.
Brush Cutter Brands
- Echo Brush Cutter Parts
- Hitachi Brush Cutter Parts
- Homelite Brush Cutter Parts
- Husqvarna Brush Cutter Parts
- Jonsered Brush Cutter Parts
- Kawasaki Brush Cutter Parts
- Ryobi Brush Cutter Parts
- Shindaiwa Brush Cutter Parts
- Toro Brush Cutter Parts
Related Brush Cutter Parts
- Brush Cutter Hardware
- Brush Cutter Filters
- Brush Cutter Hoses and Tubes
- Brush Cutter Carburetors
- Brush Cutter Caps and Lids
- Brush Cutter Seals and Gaskets
- Brush Cutter Springs and Shock Absorbers
- Brush Cutter Bearings
- Brush Cutter Starters
- Brush Cutter Handles
- Brush Cutter Transmissions and Clutches
- Brush Cutter Knobs
- Brush Cutter Brackets and Flanges
- Brush Cutter Insulation
- Brush Cutter Valves
- Brush Cutter Elements and Burners
- Brush Cutter Motors
Popular Brush Cutter Models
Below are the most popular Brush Cutter models we have. Enter your model number in the search box to find your model.
- 223L Brushcutter
- C302 Brushcutters (C)
- 323L 323 L (2004-03)
- 240 240, 20010100001-Current
- 240 240 (2002-08)
- 325LX 325 Lx (2005-05)
- 223R Brushcutter
- 223R 223 R (20060100001-Current)
- 223R 223 R (From 2011 -)
- 336FR 336 Fr
- 336FR Brushcutter
- 132R Brushcutter
- 132R Brushcutter
- 132R 132 R (20050100001-Current)
- 132R 132 R (1999-10)
- 132R 132 R, 19994000001-20050100000
- 132R 132 R, 19904400001-19920100000
- 132R 132 R, 20050100001-Current
- 132R 132 R (19904400001-19920100000)
- 132R 132 R (19920100001-19931400000)