Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The slide rail holding the vegetable drawer cracked an dbroke
I removed the 2 screws that had held the cracked drawer slide rail. The new slide rail fit perfectly. I screwed it in using a phillips head screw driver and the drawer slid back in place. Very easy!
The right drawer slide rail breaks in several places, for the 2nd time
1) The large drawer is first removed from the guide that remained on the side wall.
2) Removal of the light shield from the rear of the glass shelf to facilitate glass shelf removal by lifting the rear edge of the glass and remove it.
3) Unscrew two phillips head screws holding the remaining pieces of the plastic guide to the interior side panel of the fridge.
4) Examine the replacement guide and insure that the nylon guide and stop parts are clicked into place. If unsure, look at the guide on the other side to ensure that both are present and completely seated before installation of the replacement guide. (These usually fall out of the guide during shipping and should be in the bag with the guide!)
5) Once the guide is outfitted with the nylon guides, secure the new guide with the two phillips screws and DO NOT over tighten, remember you are dealing with plastic guide and steel screws going into a steel cabinet.
6) Re-install the glass shelf, followed by the light shield and finally the large drawer which should slide out smoothly to the stop and back closed without any drag.
7) A successful installation usually includes giving the drawer and glass shelf a good cleaning that probably could be done to the entire fridge side of the unit.
The side rails broke off the bottom two shelves, maybe because the drawer was full of apples.
I removed the shelves & drawers, then unscrewed the side rails (2 screws in each one). After screwing in the new rails (I had saved the screws from the old parts -the new rails did not come with screws), I only had to place the drawer & shelf back in the fridge and the job was done. It took maybe 5 minutes to replace. I ordered the parts late morning on day one, day two the UPS man was at my door while I was eating breakfast! Less than 24 hrs. from order to delivery!
I would recommend removing the dor first as I had to do this after fighting with the drawer to get it out. There is a cap on the hinge that has one screw, then two nuts and the door is off. From there the drawer rails are easily replaced.
I removed the old broken part and replaced with the new part. Simple as pie, my husband was so happy and impressed I had it done by the time he got home from work!!!!
I removed the two screws on each rail and replaced the broke rails with the new ones. I can't beleve I put it off for a year. It took less then 15 min. encluding the time it took to order the parts.
broken side rail - vegetable drawer would not open and close
I removed the drawer and broken piece, then I screwed in the two screws to put the new piece in place. I then had trouble putting the shelf back in place due to the piece being a little bent. I loosened the front screw and was able to manuver the shelf in place with a little force. The new bracket works great.
The drawer slide broke and I just removed the 2 screws that were still in the side of the refrigerator. I then screwed the new drawer slide in the same holes and it was done!! Simple, simple....even for me, the housewife.... ; )
This was so easy! I got the part number off of the broken part, ordered online, and it was delivered the next day!!! So fast! Then I just unscrewed the broken part and reused the existing screws to install the new one. It took about 5 min.
Turned water supply off; pressed dispenser sw to release presure ; cut tubing holding reservoir ; nuit driver to release screw holding reservoir and pulled out ; took outside and used hose nozzle to try to clear; did not clear at first then took weedeater string and disloged something and water flowed freely; turned out had to change waer solenoid valve (both) as the one for the water dispener was also plugged which did not show up before. P.S. Had back flow water thru system before and changes of parts. Water flowed freely.
I removed the two screws from the old broken rail using a regular star screw driver and replaced the new rail you sent us. Took only 2 mints to do all.