JDTS3924SP0 Dishwasher - Overview
Models starting with JDTS3924SP0
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Dishwasher Mounting Bracket
PartSelect #: PS11745496
Manufacturer #: WP8269145
The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking,...
$15.00
In Stock
Washer Hose Clamp
PartSelect #: PS11743008
Manufacturer #: WP596669
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
$7.47
In Stock
Dishwasher Screw
PartSelect #: PS11753384
Manufacturer #: WPW10348409
Sold individually.
$7.47
On Order
Hose Clamp
PartSelect #: PS11740613
Manufacturer #: WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
$9.62
In Stock
Dishwasher Screw 818 X 5/8
PartSelect #: PS11747050
Manufacturer #: WP9741232
Sold individually.
$7.47
In Stock
Side Mounting Bracket Kit
PartSelect #: PS1487167
Manufacturer #: 8212560
This mounting kit can be used on solid surface countertops.
$28.42
In Stock
Water Inlet Valve
PartSelect #: PS16217908
Manufacturer #: W11434044
The water inlet valve assembly is a crucial component of dishwashers that controls the flow of water into the unit. This genuine OEM replacement part includes the inlet valve, inlet hose, and hose cla...
$55.29
In Stock
HEATER
PartSelect #: PS16555270
Manufacturer #: W11537778
This heating element is a genuine OEM replacement sourced directly from the original manufacturer for use in various models of dishwashers. The element is designed to heat water inside the dishwasher ...
$65.73
In Stock
Power Cord Kit
PartSelect #: PS358548
Manufacturer #: 4317824
Includes power cord and all necessary parts needed for complete installation of cord.
$22.52
In Stock
STOP
PartSelect #: PS16555319
Manufacturer #: W11545307
Enhance the operational efficiency of your dishwasher with this genuine OEM Stop Front Dishrack Stop Clip from Whirlpool. This product is designed to prevent the dishrack in your dishwasher from slidi...
$22.52
In Stock
MANIFOLD
PartSelect #: PS16555324
Manufacturer #: W11545334
We're here to help you get your cooktop working perfectly again with the GE Spark Ignition Switch and Harness. This essential component is explicitly designed for cooktops, and it covers all the chall...
$51.63
Special Order
Door Seal Assembly (Lower)
PartSelect #: PS16875972
Manufacturer #: W11664713
This lower door seal is a flexible rubber gasket designed to create a watertight barrier at the bottom of your dishwasher door, preventing leaks, steam, and detergent from escaping during wash cycles....
$48.45
In Stock
Common Symptoms of models starting with JDTS3924SP0
[Viewing 10 of 10]Leaking
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Will not fill with water
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Will not dispense detergent
Fixed by
these parts
these parts
Show All
Not drying dishes properly
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Lost dishwasher brackets
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!
Parts Used:
-
Judith from Essex, MA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
76 of 116 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking Dishwasher
After pulling the dishwasher out, I was able to determine the leak was occurring around the plastic nuts on the end of the heating element. I removed the heating element and saw that even though there were washers on the ends that protruded through the backside of the machine, they really weren't sealing the holes the element was sticking
... Read more
through. Looking at YouTube videos on the installation procedure, I noticed the element being installed had a sort of metal grommet permanently affixed to each end and the rubber washers were between the grommet and the dishwasher body. I ordered the new part and saw this to be when I received the new part. This grommet allowed the washer to seal the hole, once the plastic nuts were installed on the backside of the dishwasher. This seems to have stopped the leak. I don't know how the original part ever worked correctly, since the washers freely sat on the element with nothing to force them up against the body of the dishwasher and seal the holes. It may have been leaking long before I discovered the problem.
Read less
Parts Used:
-
Scott from ISLE, MN
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Wrench (Adjustable)
26 of 29 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Inlet valve leaking at water connection
The valve has a plastic fitting to attach the the water line with a hose fitting. Was not carful enough with the original and damaged it attaching the water line. Ordered a replacement fitting. While it is possible to replace the water inlet valve without pulling the dishwasher out from the cabinet found it was easier to get at with the m
... Read more
achine out. The video does and good job of showing the removal and replacing the valve. Easy job, don't be like me and be careful attaching the water line.
Read less
Parts Used:
-
Joseph from BIRMINGHAM, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
17 of 23 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!