cut power to dishwasher. removed screws all around door panel to get front panel off, leaving top two screws for last. unplugged latch set, removed it. set new one in. screwed top 2 screws in. fit door panel back on. pulled out latch hook from stationary top piece and clicked new on in place.
We followed the video instructions, at times running to the computer to check the video.. The hardest part was getting the door to slide back on.. Thank heavens for the video.
Watched instruction video on You Tube. Easy to figure out how old adjuster came off. Followed instructions from video on installation. Did not have proper star screwdriver, but was able to use allen wrench on two screws.
The instructions that were included were a bit scetchy, but we figured it out. I like that the replacement part is made of medal and not plastic. We first put the clips on top then figured out they go below middle bar after that it all came together
Followed the instructions included with the kit, took a little while to figure out what the photos were showing. But essentially installation was easy.
While watching my infant daughter! The information strict ions and illustrations made my repair go easily. I removed the old parts and replaced the parts with ease.
One wheel broke on left side rack adjuster so the rack kept falling out of the guide rail
Found replacement instructions on the Internet and followed them to replace the left side rack adjuster. This was very easy but took the longest since I had never done it before. Right side literally took a fraction of the time since I had already done it once!
Removed broken adjuster by prying open latch tabs. Assembled replacement per instructions. Had to test fit parts due to poor illustrations, compared to other adjuster for correct installation. 2nd side went much quicker