15006 - Overview
Models starting with 15006
Click on the best match to narrow your results.
- 15006 (Mini) Dynabrade Bandfile (Dynafile II)
- 15006 Dynabrade Bandfile (Portable Belt Machine)
- 15006 (150060100101-150060399999) Troy-Bilt Tiller (Junior Vi Opc (4hp))
- 15006 (150060400101-150061199999) Troy-Bilt Tiller (Junior Vi Opc (4hp))
- 15006 (1500612101-UP) Troy-Bilt Tiller (Junior Vi Opc (4hp))
- 15006 (M0100970-M0108416) Troy-Bilt Tiller (Junior V Opc (4hp))
- 15006 (M0108417-M0115494) Troy-Bilt Tiller (Junior Vi Opc (4hp))
- 15006 (M0115495-UP) Troy-Bilt Tiller (Junior Vi Opc (4hp))
- 15006C (15006C0100101-15006C0399) Troy-Bilt Tiller (Junior Vi Opc (4hp))
- 15006C Troy-Bilt Tiller (15006c Junior Vi Opc Tiller (4hp)(S/N 15006c0100101-15006c0399)
- 15006E Dynabrade Belt or Drum Sander (Mini File Ii Versatility Kit)
- 15006S Troy-Bilt Tiller (15006s Junior V Opc (4hp) (S/N M0100970-M0108416))
- 15006S (M0100970-M0108416) Troy-Bilt Tiller (Junior V Opc (4hp))
Keep searches simple, eg. "belt" or "pump".
TINE-BOLO 10-INCH LH
PartSelect #: PS19274426
Manufacturer #: 742-04227-0637
This manufacturer-certified Left Hand Bolo Tine attaches to the left tine holder, and is used to dig up dirt in the area being tilled. This part is constructed of black metal, is rated as "easy" to in...
$26.62
On Order
TINE-BOLO 10-INCH RH
PartSelect #: PS19274422
Manufacturer #: 742-04226-0637
The Right Bolo Tine attaches to the right tine holder, and is used to dig up dirt in the area being tilled. This part is approved by the original manufacturer, and is constructed of black metal. Its i...
$26.62
On Order
SEAL-OIL
PartSelect #: PS19301951
Manufacturer #: 921-04035
This is a genuine OEM sourced item that is specially produced for Troy-Bilt and MTD roto-tillers. The purpose of this component is to provide a tight seal which will prevent oil from leaking. It is an...
$16.77
Special Order
PULLEY-IDLER
PartSelect #: PS19285514
Manufacturer #: 756-04170
This OEM Forward Idler Pulley attaches to the pivot bracket to allow the forward belt to idle when not in forward motion. If broken, the machine will no longer be able to propel forward, and the part ...
$50.96
On Order
WASHER-KEY HANDLE
PartSelect #: PS19273165
Manufacturer #: 736-04445
It is a genuine item that is supplied directly from the original equipment manufacturer for use with Troy-Bilt and MTD lawn and garden equipment. This is a special component that is utilized to provid...
$6.40
Special Order
KNOB-CONTROL
PartSelect #: PS19321467
Manufacturer #: GW-9119
This is an authentic Troy-Bilt replacement part that has been sourced from the original manufacturer to be used with tillers. The knob attaches to the end of the depth regulator bar and is used to pro...
$18.30
Special Order
GASKET
PartSelect #: PS19314059
Manufacturer #: GW-1124-2099
An authentic item that is supplied directly from the original equipment manufacturer for use with Troy-Bilt tillers. It is a special gasket that helps to provide a tight seal for the front bearing cap...
$7.15
Special Order
Washer-Flat 1.50x
PartSelect #: PS16419689
Manufacturer #: 736-04308
This is an original replacement part sourced directly from the manufacturer. The flat washer is commonly found in tillers from Troy-Bilt, Yard Machine, and MTD. This part is generally used to help s...
$6.92
Special Order
Exact Part matches for your search term
[Viewing 3 of 3]
DISCONTINUED
This part number matches the current model number 15006
PartSelect #: PS2011389
Manufacturer #: 15006
No Longer Available
Bolt, 3/8x1" Hhcs Gr5 Zp
This part number matches the current model number 15006
PartSelect #: PS9894178
Manufacturer #: 15006
No Longer Available
End Cap
This part number matches the current model number 15006
PartSelect #: PS16286699
Manufacturer #: 15006
No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Bearing seized
Pull belt cover, 2 nuts
Remove tensioner, 1 nut
Slide old tensioner off and replace
Remove tensioner, 1 nut
Slide old tensioner off and replace
Parts Used:
-
Gary from ELGIN, OK
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
1inch shaft and wheels have to be removed first.
Wheels had to be cut off of the axle in order to get to the seals. The center of wheel is 3in wide and axle isn't tappered on troy bilt pony model wheels where rusted on.
Parts Used:
-
Norman from RAINIER, WA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Socket set, Wrench set
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!