Maytag Microwave Latches

Your Price

$11.77

Maytag Microwave Interlock Support

★★★★★

4 Reviews

PartSelect Number PS11749178

Manufacturer Part Number WPW10156813

Also known as a switch holder.

Fixes these symptoms

Door not closing properly
Won’t turn on
See more...

Installation Instructions

Mark from HOMER GLEN, IL

Door switch inconsistent operation for Open/Close sensing.

Ordered top & bottom micro-switches and mounting plate parts. Internet reviews could not find specifics if the issue was due to a top/bottom or combination of micro-switch or mounting plate failure. Pulled the plug. Removed the top vent assembly cover held in by 2 Phillips screws inside the vent. Removed the control panel held in by 1 Phillip screw at the top vent assembly area. Lifted control panel upward to release the catch and moved it off to the side - didn't disconnect any leads. Used a Torx bit to remove the door switch mounting plates at the front and pulled the plates through the opening from the control panel. Documented the wire color code connections, the top plate uses 2 micro's with one using both the closed & open contact. Installed the respective micros on the mounting plates and worked backwards with the wiring and removal steps. Once completed, the open/close sensing has worked every time. Read more...

Your Price

$20.37

Maytag Microwave Top Interlock Support

★★★★★

5 Reviews

PartSelect Number PS11745301

Manufacturer Part Number WP8206419

This top interlock support is a genuine OEM safety component designed for microwave ovens. It plays a critical role in ensuring the appliance operates only when the door is securely closed, preventing potential radiation exposure. The support holds the interlock switch in place and provides a reliable latching point, allowing the microwave to function safely and efficiently. A faulty or misaligned support may result in the microwave failing to start, operating with the door ajar, or displaying error codes related to the door lock system. Replacing this part restores proper door engagement and ensures safe operation. Installation may require disassembling the control panel and should be performed with the appliance unplugged.

Fixes these symptoms

Door not closing properly
Won’t turn on
See more...

Installation Instructions

Mark from HOMER GLEN, IL

Door switch inconsistent operation for Open/Close sensing.

Ordered top & bottom micro-switches and mounting plate parts. Internet reviews could not find specifics if the issue was due to a top/bottom or combination of micro-switch or mounting plate failure. Pulled the plug. Removed the top vent assembly cover held in by 2 Phillips screws inside the vent. Removed the control panel held in by 1 Phillip screw at the top vent assembly area. Lifted control panel upward to release the catch and moved it off to the side - didn't disconnect any leads. Used a Torx bit to remove the door switch mounting plates at the front and pulled the plates through the opening from the control panel. Documented the wire color code connections, the top plate uses 2 micro's with one using both the closed & open contact. Installed the respective micros on the mounting plates and worked backwards with the wiring and removal steps. Once completed, the open/close sensing has worked every time. Read more...

Your Price

$67.82

Maytag Microwave Body Latch Assembly

★★★★★

6 Reviews

PartSelect Number PS4239694

Manufacturer Part Number DE96-00414A

This is the main latch assembly for various models of Samsung microwaves. This assembly is a main component for the door of the microwave that features three switches that detect the door itself and hold the switches in place. If your microwave and its fans are running when the door is open, a single switch on this assembly or all of them are bad and must be replaced for your microwave to turn off. This OEM assembly is built of a plastic chassis and only features the three switches, but not the securing screws necessary, and will require a screwdriver to replace.

Fixes these symptoms

Doesn’t shut off
Door not closing properly
See more...

Installation Instructions

Todd from GOSHEN, IN

Microwave would keep running when door was open

Searched for a YouTube video that included “replace Samsung microwave body latch” (whatever part name). There are plenty of easy how-tos. Read more...

Your Price

$6.40

Maytag Microwave Lever Switch

PartSelect Number PS4231025

Manufacturer Part Number DE66-00088B

Your Price

$33.69

Maytag Microwave Body Latch

★★★★★

3 Reviews

PartSelect Number PS4231065

Manufacturer Part Number DE66-00168A

This part, known as the latch-body or door latch housing is designed for use in your microwave. The function of this part is to enclose the door switches and door latch. If your microwave door is not closing or latching properly, you may need to replace this part. This product is approximately 8 inches in length and just over 1 inch in width. This part is made entirely of plastic and is white in color. Many of our customers have rated this repair as easy. This is an OEM part which is sourced directly from the manufacturer and is sold individually.

Fixes these symptoms

Door not closing properly
See more...

Your Price

$51.61

Maytag Microwave Holder Switch

PartSelect Number PS11745281

Manufacturer Part Number WP8205683

Sold individually.

Your Price

$177.56

Maytag Microwave Range Door Latch

PartSelect Number PS11759770

Manufacturer Part Number W10883049

Introducing the LATCH-DOOR Door Lock Assembly from Whirlpool. This is a genuine OEM part that's aptly designed for select models of Whirlpool, complementing their functionality. Top-notch in its category, this door lock assembly guarantees optimal performance. Notably, it locks the oven door firmly during the self-cleaning cycle, safeguarding against accidental openings. Remember to shut off the electrical power to the wall oven prior to installation and use work gloves for safeguarding your hands. It's worth mentioning that the sizes and shapes of parts may have minor variations, and verification before ordering is recommended.

Installation Instructions

NORMAN from MISSION VIEJO, CA

LIGHT SWITCH ON LATCH-DOOR BROKEN

REMOVED PANEL COVER [ 4 SCREWS]
UNSCREWED 2 SCREWS ON LATCH DOOR
ON THIS MODEL THE PART WAS IN TOO TIGHT OF QUARTERS SO I HAD TO LOOSEN A TOP PANEL SO I COULD RAISE PART HIGH
ENOUGH TO RELEASE IT FROM A CATCH AT THE BACK OF THE PART. PUSH PART BACK, RAISE AND PULL FORWARDS.
REMOVED 4 WIRES ONE AT A TIME AND ATTACHING TO NEW PART. REPLACED PART, TIGHTEN TOP PANEL AND REPLACED PANEL COVER.

NOT BAD FOR A 91 YEAR OLD Read more...

Your Price

$6.40

Maytag Microwave Lever Switch (lower)

PartSelect Number PS4231412

Manufacturer Part Number DE66-90106B

Installation Instructions

Lynn from LOUISVILLE, KY

Microwave would not start when door closed. Sometimes you could push in or jiggle door and it would work for awhile and then it woud stop again. I knew it eas a door switch issue but wasn't certain which of the 3 or the body latch itself.

I removed the body latch assembly and found the bottom micro switch (NC) terminal burnt and loose. I replaced and working perfectly fine now. Easy diagnose and easy repair. Read more...