Kenmore Wall Oven Hardware

Your Price

$11.76

Kenmore Wall Oven Handle Mounting Screw

★★★★★

7 Reviews

PartSelect Number PS978302

Manufacturer Part Number 316433300

This handle mounting screw works with your oven or range, and bolts the door handle to the door. It is approximately 2 inches in length and is an OEM part sourced directly from the manufacturer. If your oven door will not close or your door handle is loose or disconnected, you may need to tighten or replace the handle mounting screw.

Fixes these symptoms

Door won’t close
See more...

Installation Instructions

Ron from GREELEY, CO

Handle broke

Remove old handle and screws and replaced Read more...

Your Price

$5.41

Kenmore Wall Oven Screw, 8/18 x 3/8

★★★★★

2 Reviews

PartSelect Number PS11746840

Manufacturer Part Number WP90767

This screw is sold individually.

Installation Instructions

Alexander from Lakeland, FL

Broken Dryer Knob

First let me just say that Partselect.com is now one my stored favorites in my web browser. I came home from a business trip and saw a pair of pliers on the dryer. I thought that was odd until my wife informed me that the knob on the dryer had broken. So she was using the pliers to select the cycle. Somehow she knew where the missing pointer was actually pointing. Since the dryer was over 5 years old I saw this as an opportunity to upgrade both appliances. Not with my frugal wife. A search of the Internet popped up partselect. I ordered Wednesday morning and the parts where on my doorstep late Thursday. Trust me I was very surprised. Everything worked perfectly. Two thumbs up!!! Read more...

Videos!

Your Price

$16.66

Kenmore Wall Oven Single Heating Element Support Clip

★★★★★

7 Reviews

PartSelect Number PS243701

Manufacturer Part Number WB2X9719

The metallic clip, or also known as a broil element support, is for a oven element on a range. This part holds the broil element in place on top of the oven. If your support clip is broken then this replacement should be the solution. The tools needed for this project are slip joint pliers. For safety precautions, make sure to unplug your range from the power source, or shut off the house circuit breaker before starting this project. Refer to the installation instructions for best results and accuracy.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Paul from Canton, NY

broiling element had burned through, req. its replacement

First I removed the two screws that hold the element in place. I also removed a screw that held one end of a support bracket. I then pulled the element out about 3 inches and disconnected the two wires. Reversing these steps, I finished the element's replacement.

I had noticed that the former element was sagging at the front end. I installed the additional clips (not original) on each forward end of the element for additional support. Read more...

Your Price

$11.78

Kenmore Wall Oven Wafer Head Screw

PartSelect Number PS436186

Manufacturer Part Number 316001013

Your Price

$7.95

Kenmore Wall Oven Cover Screw

PartSelect Number PS11740701

Manufacturer Part Number WP308685

Sold individually.

Installation Instructions

Curtis from PALM BAY, FL

Relocating dishwasher into the new kitchen layout

In this case the dishwasher had already been installed for a few years. After removing it, we inspected it and saw it needed a bit of TLC. The transport wheels on the back were missing, making it harder to move around without scratching the tile and some of the original hardware was rusted or broken off. I looked up the parts easily here on PartsSelect using their parts breakdown diagrams and was glad to see what I needed was still available. We had a licensed plumber relocate the hot water line and drain for us to make things a bit easier.
A licensed electrician had also moved the power line over to the new location and left a wire sticking out of the bottom of the wall to hardwire the dishwasher in again. We decided to convert the dishwasher to be able to be plugged into a standard 20amp wall outlet instead. We had already purchased a kit with a nice long cord and strain-relief snap on plastic fitting that snapped onto the metal incoming power box on the bottom front of the dishwasher. Using the supplied wire nuts, etc., we connected the wires and ground wire to the proper wires from the dishwasher and ground lug. We put the dishwasher aside and then went to work on converting the power wire coming out of the bottom of the wall, to a conventional outlet. I am mentioning all this because in our first attempt we unfortunately put the receptacle a bit high off the floor and the new power cord plug end, stuck out and hit the back of the dishwasher so it would not go all the way in and was sticking out from under the counter top. I tried using one of those flat adapter cables, but even that still stuck out to far. So we ended up relocating the outlet box as low as we could on the wall and this allowed the plug to stick out into the opening area at the bottom rear area of the dishwasher so it could now be slid all the way in under the kitchen counter properly. I hope that bit of trial and error will save you some time if you ever decide to go the pluggable route too.
The new installation required the use of the dishwasher side mount brackets, so we had to purchase a replacement set of those, complete with the hardware to screw them down.

This project took a bit longer than planned due to the power plug problem, one which we will remember for any other similar appliance relocation projects, as well as the time to get our new parts in that we had to order, but other than that the rest went smoothly and the dishwasher was relocated successfully. Read more...

Your Price

$5.37

Kenmore Wall Oven Support Roller Clip

★★★★★

1 Review

PartSelect Number PS11746832

Manufacturer Part Number WP90296

Sold Individually.

Fixes these symptoms

Noisy
See more...

Installation Instructions

randy from simi valley, CA

bad drum rooller bearing

took the top, sides and back removed the drum and replaced the roller roller shaft and drive belt and the belt tensioner Read more...

Your Price

$9.63

Kenmore Wall Oven Ignitor Mounting Screw

★★★★★

2 Reviews

PartSelect Number PS234519

Manufacturer Part Number WB1X1293

Sold Individually.

Fixes these symptoms

Little to no heat when baking
See more...

Installation Instructions

CHRISTOPHER from REDMOND, OR

Oven Igniter Died

The only difficult part of the repair was getting the original screws out of the old igniter and oven gas arm. Once I drilled the old screws out the repair was done within 20 minutes. Read more...

Your Price

$12.19

Kenmore Wall Oven SCREW 10-32 TR T

★★★★★

2 Reviews

PartSelect Number PS222157

Manufacturer Part Number WB01T10008

This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to connect the different parts of your oven door. This part is an authentic OEM part sourced directly from the manufacturer.

Your Price

$11.24

Kenmore Wall Oven Steel Washer

PartSelect Number PS436497

Manufacturer Part Number 316008401

This steel washer is also known as the range washer and is used on your oven door. The measurements for the steel washer are a three quarter inch outer diameter, and a one quarter inch inner diameter. This washer is an OEM part, made of steel, which is sourced directly from the manufacturer. This specific steel washer is used with your range, to secure the inner and outer door together and to secure the oven door handle back in place. Users have ranked this repair as a simple installation that should take you less than fifteen minutes to complete.

Installation Instructions

KELLY from LAKELAND, FL

Handle on oven door broke

called around and way to much money for repair man as well as parts from local appliance repair store. They wanted 10.00 for a screw that we got from you for $3.00 same as all the other parts saved over 70.00 dollars.

quick delivery and easy repair ... like new again .

would use you again Read more...