Frigidaire Refrigerator Fans and Blowers

Your Price

$28.42

Frigidaire Refrigerator Condenser Fan Blade

★★★★★

4 Reviews

PartSelect Number PS11703633

Manufacturer Part Number 241639502

This is a genuine condenser fan blade, which works with refrigerators, freezers and wines and beverage coolers.

Fixes these symptoms

Fridge and Freezer are too warm
Fridge too warm
Noisy
See more...

Installation Instructions

James from GLEN FLORA, TX

Plastic fan broke

took the cover off
(cardbord) the fan will come off and go back on by hand no tools needed i changed the fan motor just to be sure. 3 little screws hold it on. the plug only goes on one way u can't mess it up.very easy job u shouldn't have any problems doing it.Jim Read more...

Videos!

Your Price

$51.61

Frigidaire Refrigerator Evaporator Fan Blade

★★★★★

5 Reviews

PartSelect Number PS473177

Manufacturer Part Number 5308000010

This evaporator fan blade is a genuine OEM part that is sourced directly from the manufacturer. The evaporator fan blade circulates air through the refrigerator to control the amount of cold air goes that goes to internal compartments of the unit. It may need to be replaced if the fridge is noisy or not cold enough. This part is made of plastic and is sold individually. It will be necessary to disconnect power to the refrigerator and empty the freezer compartment of the refrigerator. The tools needed to complete this repair are a 1/4 inch nut driver and a pair of needle nose pliers.

Fixes these symptoms

Fridge too warm
Noisy
Too warm
See more...

Installation Instructions

Jordan from Maumee, OH

Noisy fan

1. Removed the 7 nuts using the nut driver from the freezer back panel inside the freezer.
2. Remove the back panel. The evaporator motor and fan are located above the coils.
3. Unplug the wiring harness.
4. Remove the two gold mounting screws holding the motor and fan in place.
5. Remove the motor and fan including the brackets.
6. Install the new motor and fan onto the mounting bracket.
6a. Attach the green ground to the mounting bracket.
7. Screw the two gold screws back into the freezer.
8. Attach the new wiring harness. Note, the old harness had a mounting hole/space for it to connect to the wiring harness of the freezer. The new motor's harness was not long enough for this, so it is connected freely to the freezer harness.
9. Use the hair dryer to melt any ice that may have formed on the coils and hole where the fan goes.
10. Turn the freezer on to see if the fan turns on.
11. Reinstall the back panel.
All done! Read more...

Videos!

Your Price

$36.85

Frigidaire Refrigerator Fan Blade

★★★★★

16 Reviews

PartSelect Number PS2361234

Manufacturer Part Number 240524102

This part blows air over the condenser.

Fixes these symptoms

Clicking sound
Fridge too warm
Noisy
See more...

Installation Instructions

Milton from Camp Hill, PA

Broke a blade off of the fan

When cleaning the coils on your refrigerator always remember rule number 1, unplug it first. I was cleaning the coils and hit the fan blade while it was moving with a brush, thus breaking off one of the fan blades. I ordered a new fan and installed it in about 15 minutes. Very easy repair. Read more...

Your Price

$25.75

Frigidaire Refrigerator Fan Blade - Black

★★★★★

2 Reviews

PartSelect Number PS10060218

Manufacturer Part Number 242219302

This refrigerator evaporator fan blade is designed to attach to the evaporator fan motor and circulate cold air evenly throughout the refrigerator and freezer compartments. Made from durable black plastic with a four-blade design, it helps maintain consistent temperatures, improves overall cooling efficiency, and reduces frost buildup on the evaporator coils. Replacing a worn or damaged fan blade can resolve issues such as unusual squealing or grinding noises, weak airflow between compartments, or sections of the appliance becoming too warm or too cold. Installation involves removing the interior freezer panel, securing the blade onto the fan motor shaft, and ensuring it spins freely before reassembling the unit.

Fixes these symptoms

Fridge too warm
Noisy
See more...

Installation Instructions

Ali from HERNDON, VA

No cool in lower refrigerator

I’m a technician,I was contacted by a customer. After listening to the customers issue I determine the freezer evaporator fan was bad. Real easy job loosen the hex head screws on top of the ice maker and pull it straight up. Disconnect ice maker wiring harness.remove the two top 1/4” screws that hold the back cover on and pull it forward. Disconnect your wiring harness and remove the whole back panel. Lay the back panel face down on the floor and remove two metal clips that are up at the top with a flat head screwdriver. Center plastic panel slides up and out maybe necessary to take a flat head screwdriver to the very top to release the plastic clip. Pull your fan blade off. On the backside of the motor just take and twist the flat plastic piece counterclockwise and remove your motor and install the new one Reassemble in the opposite order. Read more...