Bosch Range Igniters
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Bosch Range Igniters
Your Price
$24.32
In Stock
Bosch Range Elecrtrode
PartSelect Number PS10057850
Manufacturer Part Number 00631633
This surface burner igniter, also known as an electrode, is a genuine OEM component designed to generate the spark required to ignite the burner on select gas ranges and cooktops. Constructed from high-quality ceramic and stainless steel, it offers excellent heat resistance and long-term durability. The igniter replaces worn or non-functional components that may cause ignition failure or inconsistent burner performance. Installation should be performed with the appliance unplugged, and care should be taken when handling the fragile ceramic portion. Always consult the appliance’s manual to ensure proper fit and installation.
Fixes these symptoms
- Gas igniter glows, but will not light
- Will Not Start
- See more...
Your Price
$141.43
In Stock
Bosch Range Bake Igniter
PartSelect Number PS8722793
Manufacturer Part Number 00492431
If your gas oven is not heating at all, or not heating properly the most commonly problem is a faulty igniter. The bake igniter is used in gas overs and ranges, the element in the igniter gets hot enough to ignite the gas that lights the oven burner. This bake igniter assembly features a wire harness and push-on wire terminal ends for easy installation. Handle this replacement part with care, do not touch the element inside the igniter as it is very fragile. Before you replace this part make sure you have unplugged your oven and shutoff the gas supply.
Fixes these symptoms
- Element will not heat
- Gas igniter glows, but will not light
- Little to no heat when baking
- See more...
Your Price
$27.52
In Stock
Your Price
$123.03
In Stock
Bosch Range Surface Burner Igniter And Orifice Holder - Rf 17k
PartSelect Number PS2368573
Manufacturer Part Number 316536622
This range surface burner igniter and orifice holder assembly is designed for use on a gas range and is commonly positioned at the right-front burner, often the high-output cooking zone. The assembly combines the igniter electrode and gas orifice to regulate fuel flow and generate a spark, producing a strong, consistent flame rated at 17,000 BTUs for reliable high-heat cooking. Constructed from heat-resistant metal, it is typically replaced when a burner will not ignite, no longer clicks, produces a weak or uneven flame, or shows visible damage such as cracks or carbon tracking on the electrode. Installation generally involves shutting off the gas supply and power to the appliance, removing the burner components, and securing the new igniter and orifice holder in place to restore proper burner ignition and flame performance.
Installation Instructions
James from RACINE, WI
Easy
Repair was east but the price I paid through you was 3 times what I found elsewhere. I made a mistake ordering through your expensive company
Read more...
Your Price
$56.41
In Stock
Bosch Range Ignition Device
This resulted in needing to replace the venturi tube and its holder. Easy once you have access. Internal cooktop pieces are super simple and easy to install.
CLUE - It you must replace a Venturi Tube - you cannot find one to purchase. You must buy the full "Repair-Set" (kit comes with 6 tubes). Bosch (Thermador) Part Number 11016284. Read more...
PartSelect Number PS8727623
Manufacturer Part Number 00612817
Installation Instructions
John from HUNTINGTN BCH, CA
Random igniter sparking and burner light always on.
The seriously tough parts of this job is removing the five Venturi Tubes that hold the burners in place and the cooktop surface down. One had corroded badly so the brass nut (it is the venturi tub itself) have to be removed by drilling. Luckily, the other four unscrewed.This resulted in needing to replace the venturi tube and its holder. Easy once you have access. Internal cooktop pieces are super simple and easy to install.
CLUE - It you must replace a Venturi Tube - you cannot find one to purchase. You must buy the full "Repair-Set" (kit comes with 6 tubes). Bosch (Thermador) Part Number 11016284. Read more...
Your Price
$35.47
In Stock
Bosch Range Ignition Head
PartSelect Number PS8698440
Manufacturer Part Number 00189324
This is a cooktop burner igniter that is compatible with various makes and models of cooktops and ranges and is sold as an individual part. This part creates a spark that ignites the burner within your cooktop or stovetop and is made of a combination of metal and ceramic. If the ceramic insulator is cracked or broken in any way upon inspection, this igniter will need to be replaced immediately. Before replacing this igniter, make sure your cooktop or range is unplugged from any sources of electricity and that the gas supply is shut off.
Your Price
$110.95
In Stock
Bosch Range Igniter
To replace the igniter then requires the complete removal of the back of the range (17, size 20 star-driver, screws, if I remember correctly), plus the removal of an additional heat shield (one more screw). Then one must carefully lift and free the back from tabs on both sides that are set into slots. (Oh, and you probably want to loosen the electrical cord shield that interferes with the back coming off.) The new igniter wire plug is only then very easily re-attached to existing harness. Everything is then replaced to finish the repair.
None of this is difficult, if you don't mind moving your range away from the wall and dealing with on the order of 20 screws. Personally, I think I would have rather found an igniter with ceramic wire nuts to splice to the original wires (certainly not as elegant as replacing igniter and wires entirely, but far quicker and easier). Read more...
PartSelect Number PS9495615
Manufacturer Part Number 00755058
This hot surface igniter is a critical component for ensuring reliable ignition in select gas ovens and ranges. Designed for optimal performance, it uses electric current to heat up and ignite the gas burners, enabling efficient and consistent oven operation. The igniter contributes to both safety and cooking precision by ensuring the burners light quickly and maintain stable heat. Manufactured to meet original specifications, it offers dependable performance and long-term durability. Installation typically involves disconnecting power and gas supply, accessing the burner assembly, and replacing the igniter using standard tools. Replacing a faulty igniter can resolve issues such as delayed ignition, uneven heating, or failure to light.
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
Jeffrey from Bloomington, MN
Igniter replacement
Getting to the igniter is trivial, only requiring the removal of the stove bottom (two set screws) and a heat shield (the heat shield is held in place by screws with size 20 star-driver heads). At this point a splice could be made to the original wires, IF ceramic wire nuts were included with the replacement igniter (but, alas, they are not). IF a splice were made the repair would be a very easy, 10-minute job. To replace the igniter then requires the complete removal of the back of the range (17, size 20 star-driver, screws, if I remember correctly), plus the removal of an additional heat shield (one more screw). Then one must carefully lift and free the back from tabs on both sides that are set into slots. (Oh, and you probably want to loosen the electrical cord shield that interferes with the back coming off.) The new igniter wire plug is only then very easily re-attached to existing harness. Everything is then replaced to finish the repair.
None of this is difficult, if you don't mind moving your range away from the wall and dealing with on the order of 20 screws. Personally, I think I would have rather found an igniter with ceramic wire nuts to splice to the original wires (certainly not as elegant as replacing igniter and wires entirely, but far quicker and easier). Read more...
Your Price
$146.47
In Stock
Bosch Range Ignition Device
PartSelect Number PS10058840
Manufacturer Part Number 12004873
This ignition device generates the spark or heat required to safely ignite fuel during appliance operation. It plays a critical role in reliable startup and consistent heating performance. Replacing a faulty ignition device can resolve issues such as delayed ignition or failure to heat.
Your Price
$15.99
In Stock
Your Price
$133.85
In Stock
Bosch Range Broil Igniter
PartSelect Number PS8722791
Manufacturer Part Number 00492429
Broil ignitors are used in gas oven and ranges. These igniters are used the ignite the gas that lights the oven burners. If the broil burner on the roof of your appliance will not light you may need to replace the broil igniter. Before starting this repair, you need to unplug your appliance, remove the oven door, and the racks inside. You then need to remove the screws that hold the burner and shield assembly to the roof of your oven. Remove the screws holding the igniter in place, and disconnect the wire lead. Position and secure the new igniter, and reconnect the wire lead. Then reinstall the burner, the racks and the door. Handle this replacement part with care, make sure you do not touch the element on the igniter as it is fragile.
Fixes these symptoms
- Little to no heat when broiling
- See more...
Related Bosch Range Parts
- All Bosch Range parts
- Bosch Range Brackets and Flanges
- Bosch Range Caps and Lids
- Bosch Range Circuit Boards and Touch Pads
- Bosch Range Doors
- Bosch Range Drawers and Glides
- Bosch Range Ducts and Vents
- Bosch Range Elements and Burners
- Bosch Range Fans and Blowers
- Bosch Range Filters
- Bosch Range Fuses
- Bosch Range Handles
- Bosch Range Hinges
- Bosch Range Hoses and Tubes
- Bosch Range Knobs
- Bosch Range Latches
- Bosch Range Legs and Feet
- Bosch Range Lights and Bulbs
- Bosch Range Motors
- Bosch Range Panels
- Bosch Range Seals and Gaskets
- Bosch Range Sensors
- Bosch Range Springs and Shock Absorbers
- Bosch Range Switches
- Bosch Range Transformers
- Bosch Range Trays and Shelves
- Bosch Range Trims
- Bosch Range Valves