Black and Decker Generator Parts

Why Genuine OEM Matters

Shop By Appliance Type

Popular Black and Decker Generator Parts

FILTER GEN9.5 22 PLEATS NEW – Part Number: N600601

Your Price

$7.17

Black and Decker Generator Filter Gen9.5 22 Pleats New

PartSelect Number PS18994675

Manufacturer Part Number N600601

Works with Black & Decker hand held vacuums.

Your Price

$6.40

Black and Decker Generator Pre-filter

PartSelect Number PS18989567

Manufacturer Part Number 90640311

This genuine OEM pre-filter in your vacuum is the first line of defense against larger debris and particles, preventing them from clogging the main filter and improving overall filtration efficiency. Positioned inside the dust bowl, you will know it is time for a replacement when the pre-filter appears visibly dirty or clogged, leading to reduced suction power and airflow. To remove the pre-filter, simply press the dust bowl release button on the handle, detach the dust bowl, and take out the filter from within. When installing the new pre-filter, securely attach it to the filter before placing it back into the dust bowl. It is advisable to replace the filter every 6 to 9 months, depending on usage frequency. Keep in mind that the pre-filter and filter are sold separately.

GROMMET, DRAIN COCK – Part Number: N103455

Your Price

$22.50

Black and Decker Generator Grommet, Drain Cock

PartSelect Number PS18993263

Manufacturer Part Number N103455

This is an OEM part sourced directly from the manufacturer, sold individually. The grommet is inserted into the fuel tank of the generator to hold the fuel drain cock, which can be shut off to stop the flow of fuel, or opened to allow the fuel to flow to run the generator. No tools are required for installation. Part is compatible with the models listed below.

NUT .375-16 HEX WHIZ – Part Number: SSF-8111-ZN

Your Price

$6.40

Black and Decker Generator Nut .375-16 Hex Whiz

PartSelect Number PS18997472

Manufacturer Part Number SSF-8111-ZN

ISOLATOR VIBRATION 1 – Part Number: GS-0033

Your Price

$13.23

Black and Decker Generator Isolator Vibration 1

PartSelect Number PS12521565

Manufacturer Part Number GS-0033

This is a manufacturer approved isolator that is specially designed for use with electric generators. Its mounted between the motor and the frame to help minimize the vibrations caused by a running engine. One durable rubber isolator with a metal threaded shaft is included per order.

Your Price

$33.80

Black and Decker Generator Cap Fuel Tank

PartSelect Number PS18992708

Manufacturer Part Number GS-0443

This high quality replacement cap is an authentic OEM sourced item that is designed for use with generators. It is designed to keep the fuel in the tank. This fuel cap is made from durable plastic and it is sold individually.

TANK FUEL 7G SS – Part Number: Z-GS-0795

Your Price

$253.82

Black and Decker Generator Tank Fuel 7g Ss

PartSelect Number PS18997563

Manufacturer Part Number Z-GS-0795

This genuine OEM fuel tank, also known as the gas tank, in your generator serves as the primary storage for the fuel that powers the engine to produce electricity. Typically positioned on the top of the frame assembly, this gas tank measures 22 inches in length and 18.5 inches in width, with mounting holes positioned 16 inches apart at the center and 3 inches apart from each end of the tank. To determine if the fuel tank needs replacement, inspect it for damage, corrosion, rust, or any signs of leaks. To replace the tank, start by removing the securing screws and disconnecting the gas line. Drain the remaining gas into a container. Remove the gas valve from the old tank and take out the tank. Install the new gas valve onto the new tank and securely place the new tank. After reconnecting the gas line and filling the tank with gas, conduct a thorough check to ensure there are no signs of leaks.

Your Price

$6.40

Black and Decker Generator Clamp Fuel .50

PartSelect Number PS18992707

Manufacturer Part Number GS-0227

This is an authentic Porter Cable replacement part that has been sourced from the original manufacturer to be used with air compressors from Porter Cable, DeVilbiss, and Black & Decker. The special clamp is used to secure the connections between fuel lines. This item is sold as an individual replacement part.