Water Filling Issues | No hot or cold water | Leaking
This part works with the following products:
Washer.
This part works with the following products:
Frigidaire.
Part# 5304528029 replaces these:
5304514790, 5304522534
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
9 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tom
November 2, 2023
I just want to double check that this is the right part for my model...it doesn't have a number at the end.
The number on the part I pulled it: "33950008."
Thanks
For model number EFLS627UTT
Hi Tom, thank you for reaching out. Based on our research, the part mentioned is compatible with your model. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jeanette
February 4, 2024
Washing machines sometimes fills and sometimes doesn't. I think it only works with hot water.
Cold and warm wash gets E11
Is the value the correct part to get?
For model number EFLS527UTT2
Hi Jeanette, thank you for contacting us. According to our research, the error code E11 indicates that there is an issue with the fill time of your washer. We would recommend replacing the water inlet valve, part number PS16544354, to solve the problem. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tom
February 22, 2024
We have water leaking into the tub after not using the washer for a couple of days. Is this the right valve that controls the water intake?
For model number EFLS627UIW0
Hello Tom, thank you for your inquiry. Yes, you will need to replace the water inlet valve, part number PS16544354. Glad to be of help!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joe
June 13, 2024
E11 error code question. When running my washing machine through its diagnostic test, everything gets water all dispensers get water the rinse and spin cycle work but when I get to number six on diagnostic, the tub is supposed to fill with water and it does not. That’s the only time it doesn’t fill with water but gets water any other time would it still be the inlet valve or the pressure switch or something else I have plenty of water pressure at the inlet. When turning on washer I can hear the pump draining any remaining water once it stops I can hear what sounds like the water valve opening but no water. After about 30 seconds machine shuts off and E11 error code shows in display.
For model number EFLS627UTT0
Hi Joe, thank you for your question! Check the water valve inlet screens. The screens prevent minerals from clogging the solenoid. With the hoses removed, you can visually inspect the water inlet screens. If the water valve screens are clear, check the water inlet valve and pressure switch continuity using a multimeter. If both are fine, we would recommend replacing the electronic control board, part number PS12705782. Good luck with the repair!
Is this the correct part if the threaded plastic pink hot water intake breaks? You have to install the entire assembly? Thanks for your help with this
For model number EFLS627UTT0
Hello Kris, thank you for writing. Yes, the part PartSelect Number PS16544354 you had chosen is compatible with your model. We hope to hear from you soon.
Was this helpful?
Thank you for voting!
Tim
February 13, 2023
My washing machine is not getting water once the start cycle is pressed. I can here the valve click on but there seems to be no water flow. It clicks on a second time them then shuts off. At one point the the drum moved for a sec but then it shuts off. I removed both water hoses and cleaned the intake screens of debris and tried again but to no avail. I have lots of water flow. The water however is definitely not going into the machine. Could this be the Pressure switch, Flow meter, or the Flow control valve where the water come in?
For model number EFLS527UIW1
Hello Tim, thank you for writing. The part responsible for the water coming from the house to the machine is the Water Inlet Valve Assembly PS16544354. We are pleased to have been able to help.
Was this helpful?
Thank you for voting!
Emily
March 12, 2023
Would this part be a suitable replacement for our model of washer? Having a hard time finding it.
Thanks!
For model number ELFW7537AT1
Hello Emily, thank you for your question. For your model, we find the correct Water Inlet valve to be PS8689119. We look forward to hearing from you.
The fabric softener gets no water flow. The detergent cups, and bleach all have good water flow but not a drop for the fabric softener. I am thinking it is the valve or the conveyer?
For model number efls627uiw0
Hello James, thank you for contacting us. Based on the description that you have provided, we would recommend checking the dispenser conveyor. If it is not faulty, then you may need to replace the water inlet valve, part number PS16544354, to fix the issue. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
Tadeusz
December 10, 2021
Manufacturer parts # 53045228029 (36)
For model number EFLS627UIW0
Hello Tadeusz, we appreciate your writing. For model EFLS627UIW0 the Water inlet Valve is PartSelect Number PS16544354. We hope this helps.