We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
ROBERT
March 28, 2018
The bracket that holds together the upper control panel and the front panel of the door is broken. When i close the door i need to push in the top control panel in order to get the control panel to light up so that i can start the dishwasher. What parts do i need to replace?
For model number KUDS30IXBT6
Hi Robert,
Thank you for your question. It sounds like you will need to replace your control bracket. I have listed the correct part for your model down below. You may also have to take a look at your touch pad control panel as well. You may have to replace that if it is broken too. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
March 29, 2018
I removed the screws for the door and lifted out the control panel. Should the control panel just be loose and just come out or should it be snapped into place on the metal frame of the exterior part of the door?
For model number Kuds30ixbt6
Hi Robert, Thank you for the question. The panel should just lift out. Hope this helps!
Was this helpful?
Thank you for voting!
Frank
April 24, 2024
My door does not go all way down it lifts up a bit so we manually have to push door down to pull lower tray out. I don’t see any springs on the door .is there a part that would allow the door to be pushed down when loading & not releasing up?
For model number WDT730PAHZ0
Hello Frank, thank you for getting in touch. According to our understanding, the issue is most probably with the door spring, part number PS12348349. We would recommend replacing it to fix the issue. We hope this solves your problem!