All Installation Instructions for Whirlpool Refrigerator W9TXNMFWS01

Screws are a bit small and short for the job

Using a screwdriver

Parts Used:

Screw

Screw - 8-32 X 1-1/4

Sheryll Lawrence from BRONX, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

changed the light bulb still would not work so I figured it was the switch sure enough.

I took a chance and ordered a switch that is next to the top of the door. looked for how to remove it easily done in ten minutes works fine last long time.

Parts Used:

Refrigerator Door Switch

anthony from HAVELOCK, NC
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

replaced cracked compartment door

removed old and installed new compartment door by hand.

Parts Used:

Compartment Door

john from NORWOOD, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

door hinge broke.

Removed door and replaced bushing bracket was ok.

Parts Used:

Hinge Bracket

Bernard from DONALDSONVLLE, LA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Drawer cracked/split

I just slipped the new drawer into place. So easy, even a woman can do it! ( I am female!)

Parts Used:

Refrigerator Crisper Drawer

Yvonne from Fredericksburg, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The bottom handle was broken

I simply changed out the handle itself and put the doors back on the fridge
No Problem

Parts Used:

Door Handle Kit - White

John from Norfolk, VA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Light switch broke

Pried out old part with screwdriver. Unplugged. When new part came, just plugged it in and pushed the part into place.

Parts Used:

Refrigerator Door Switch

Carolee from Spokane Valley, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

I had taken freezer door off when moving and misplaced the one of the hinges.

I attached the hinge and secured it with screws and socket wrench.

Parts Used:

Bottom Door Hinge with Pin

Darlene from Philadelphia, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

freezer and refrigerator compartments not cold enough

Used the suggested problem list here to narrow down that the repair was most likely the run capacitor. Poped the new one in and I now have better control of my compartment ranges. I have a temperature gauge in each compartment. Check them every opening of the doors.

Parts Used:

Capacitor

Michael from Colorado Springs, CO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

compressor not running

Removed the access panel on back of unit located the Run Capacitor on the compressor and removed the bad one and put the new one on and pugged refrigerator back in and it started up and works fine now

Parts Used:

Capacitor

Doug from Lancaster, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

freezer handle did not fit

took the screws out of refrigerator and places handle on refrigerator and screwed them tight

Parts Used:

Door Handle Kit - White

Jonnie from Belton, TX
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

My Crisper Pan was broken so I needed a new one.

I ordered a new one waited for the new ones to come in once it did I took out the old ones and replaced them with the new ones. It was simple.

Parts Used:

Refrigerator Crisper Drawer

Debra from Lakewood, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The Light Socket Burned Out.

I pulled the socket out and unplugged the wires. I replaced the light socket by plugging in the wires and snapping the light socket into place. A very simple fix.

Parts Used:

Light Socket Kit

MATTHEW from STOCKTON, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

5 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Fridge won't start

When you plug in the fridge it will begin to make noise, but never get cool. When you open the door it will stop and will not turn back on.

This part is listed as one that can fix the problem, but the installation video does not match my fridge.

I've replaced the capacitor (PS11757023), the compressor start relay (PS11740412), and condenser fan (PS1957416) and none of them have fixed the problem.

I really don't want to throw this fridge out. Please help! justin@jplt.com

Parts Used: