Models > TR525SW > Instructions

TR525SW (P1182801W W) Amana Refrigerator - Instructions

All Instructions for the TR525SW
61 - 75 of 123
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken support post for crisper drawer
Lifted both drawer runners removed the broken post, put new post in place. Job completed in lest than two min.
Parts Used:
Crisper Drawer Cover Support Post
  • Joseph from Lakeland, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lights didn't always come on when was opened
Used a screwdriver to pry loose the old switch, swapped wires to the new switch and pushed it into the opening. Took about 2 minutes.
Parts Used:
Refrigerator Door Switch
  • Gary from Jenkintown, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
seal crisper was broken off of the produce drawer
I removed the drawers, and removed the glass top from the shelf above the drawers. Then I removed the drawer frame, turned it upside down and attached the seal crisper. Replaced the pieces and everything was done.
Parts Used:
SEAL- CRIS
  • Sandra from Shelby Township, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken handle on fridge door.
Three screws removed and replaced handle. Replaced screws and it was just like new.
Parts Used:
Door Handle
  • Travis from Austin, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic on handles had fallen off.
Had to "pop" off little plastic cover w/ flat blade screwdriver. Then just unscrewed 3 screws and replaced handle. Did both handles in about 15 minutes. Looks like new.
Parts Used:
Door Handle
  • Mark from Alpharetta, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
light would work intermitently
removed the 2 screws that held the panel in place, had to reach up and push on locking tabs to lower trhe front of the panel. was able to then push on the locking tab of the switch to release it. removed the wires, replaced them onto the new switch, and snapped the switch into place. the rest was reverse of the uninstall process.
Parts Used:
Refrigerator Door Switch
  • Gregory from middle island, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Handle was broken.
Removed old part and replaced. Very easy.

Received new part in 2 days. Outstanding Service!!!!!!
Parts Used:
Door Handle
  • Daniel from Round Rock, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken light switch
Part was easy to order, delivered quickly, installation very easy. Just unplug the unit, pop out the old swich using a screwdriver, disconnect and reconnect leads and pop switch back in. Definitely recommend that you can do it too.
Parts Used:
Refrigerator Door Switch
  • George from North Scituate, RI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broeken Handle
Very simple job. Be careful taking off the small plastic cover for the screw at the bottom of the handle.
Parts Used:
Door Handle
  • David from Muncie, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cracked Door Handle
I ordered the part and it literally came the next day! Very easy to install but make sure when you take off old handle you save the bottom cover piece before you remove the lower screw. Also save original screws to use again.

I am very happy with Part Select and would highly recommend them. Thank you!!!
Parts Used:
Door Handle
  • Christine from Portland, ME
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Refigerator Door Handle
Extremely fast shipping. Ordered in the aftertoon, had item in hand the next morning. Easy installation, even for the mechanically challenged like me.

One suggestion though, when asking for a review, you should incorporate the Model Number within the email. I work on obtaining reviews for my company, and I have found that the more work involved to write a review, the less likely people are to do so. Just a suggestion.
Parts Used:
Door Handle
  • Jennifer from Aurora, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door Light switch cracked Mounting
I noticed that the refrigerator was having trouble maintaining temperature. Thought it might be time for new one until I found out that a new frig was $5k to $7K. Just happened to notice that the light switch didn't look quite right (was not sitting sqaure to the door). Once I pressed it it came loose. I then realized the the lights were staying on (50 watts of heating). Replaced the switch and the frig started working like new.
Parts Used:
Refrigerator Door Switch
  • Paul from Hinsdale, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The refrigerator handle broke
We ordered the part, in arrived promptly, and my husband installed it with no problems.
Parts Used:
Door Handle
  • Judy from Sebastopol, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old switch left freezer bulb always-on
Unplug appliance. Socket wrench to unscrew two screws. Module drops down. disconnected two press-on wires by prying off with screwdriver. Removed old switch. Press-fit new switch. Reconnected two wires (color coded). Screwed module back in place. Plug in appliance.
Parts Used:
Refrigerator Door Switch
  • JONATHAN from ELKINS PARK, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
plastic covering broken off.
Took screw out and put new part back on with same screw.
Parts Used:
Door Handle
  • Veldora from Moscow, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the TR525SW
61 - 75 of 123