Removed stove top to work bench' Disassembled burners from enclosure to gain access to spark module. removed old module and disconnected slip on electrical connections Installed four new slipon connectors to match new modual attached newmodule to frame and connected wires. Tested unit by pluging into electeic outlet and turning burner dial to lite . Success reassembled stove top and installed in kitchen. job complete
I used the advise given in the website and it was very informative- the part was exactly where the folks on the website said it would be and although it wasnt the actual maytag part it was easily fitted by using the wire splices i mentioned and it was shipped quickly The whole process took less the 30 min once received. thank you for a very useful site.
Removed screws from back right of oven. Found spark module under right side panel of oven. Module connected in a slightly different way, so I had to drill a new hole and use a machine screw to secure it. All wires matched up exactly on new spark module. Replaced side panel, plugged it in and... SPARKS. Cheap and easy replacement and didn't have to call Maytag for repair!
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the six wires. Then I repeated those steps in back order. That's it