RT21AKXKQ09 Roper Refrigerator - Instructions
Sections
Parts
Questions & Answers
Symptoms
Videos
Instructions
All Instructions for the RT21AKXKQ09
Light didnt go on
The light rocker switch wasnt working. I found the part on the web site. It was so easy. I used a screw driver to pop out the old one and pop the new one in. It took 5 min. Thanks!!!
Parts Used:
dorotea from staten island, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 5 people
found this instruction helpful.
Thank you for voting!
Faulty light socket
Followed the video instructions.
Parts Used:
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
3 of 5 people
found this instruction helpful.
Thank you for voting!
The drawer cracked and broke.
Just slid the drawer into the runners and finished.
Parts Used:
Leonard from MASTIC BEACH, NY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 2 people
found this instruction helpful.
Thank you for voting!
After 17 years, the old door gasket was split and showing signs of mold
The gasket has an inner lip that fits over the edge of the door plastic liner. The old gasket was removed by pulling it straight out, in the plane of the door. Try not to pull sideways as it could crack the door liner, which gets brittle with age. The new liner had a brown magnetic strip, which holds the door closed, and this fits behind the edge of the door liner. Start on the bottom of the door. A helper is useful to hold the gasket loosely vertical. A flat blade screwdriver can be used to pry away the liner to insert the new seal. Once you have worked in the lower edge, install both sides, and then the top. Some juggling side-to-side may be needed for an exact fit
Parts Used:
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
2 of 2 people
found this instruction helpful.
Thank you for voting!
Broken Refrigerator door retainer
This job was extremely easy, snap on.
Parts Used:
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 2 people
found this instruction helpful.
Thank you for voting!
Replace meat draw
Came on time, just slide in
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 2 people
found this instruction helpful.
Thank you for voting!
Broken crisper frame
Replaced frame
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 2 people
found this instruction helpful.
Thank you for voting!
My crisper cover frame broke
It was very easy just took out the old broken crisper cover frame out and put in the new one. Simple as that.
Parts Used:
Linda from ROCK ISLAND, IL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 2 people
found this instruction helpful.
Thank you for voting!
Motor on ? off
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Wrench (Adjustable)
2 of 2 people
found this instruction helpful.
Thank you for voting!
install ice maker with all parts for refridgerator with no ice cube hardware on it.
I followed the directions and it worked.
Parts Used:
Vincent from THE VILLAGES, FL
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
2 of 2 people
found this instruction helpful.
Thank you for voting!
ice maker
My husband is an appliance man and he did the work.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
2 of 2 people
found this instruction helpful.
Thank you for voting!
Defrost drain clogged with ice
Replaced gaskets on both doors. Followed the online video link that came with emailed receipt. Worked exactly like demonstrated in the video.
Parts Used:
Total Repair Time:
30 - 60 mins
2 of 2 people
found this instruction helpful.
Thank you for voting!
Installed a Ice Maker
Very easy to install
Parts Used:
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
2 of 2 people
found this instruction helpful.
Thank you for voting!
It was my first time to install a ice maker.
I first read the instruction manual then I watched the installation video. My water line to it was 3/8. Went to the local ACE Hardware to purchase a short peace of 1/4 copper tubing and the fittings to connect them together. It makes ice every 55 minutes.
Parts Used:
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable), Wrench set
2 of 2 people
found this instruction helpful.
Thank you for voting!
The handle broke and my wife was afraid to close the door because she might not be able to open it back.
The part-select video showed me to do the following: Unplug dish washer Open the door and unscrew the screws around the inside of the door all around. Place the screws in the detergent holder with a cap until finished. The door mechanism is at the top and attached to two electrical wires. Unfasten the wires from the attachment. Take the new attachment and fasten the wires to it. Place the attachment back in the spot and make sure handle is sticking thru the hole to the outside. Reattach the screws. Plug back chord. Finished - 15 minutes
Parts Used:
Jeff from WINSTON SALEM, NC
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
2 of 2 people
found this instruction helpful.
Thank you for voting!
All Instructions for the RT21AKXKQ09