Uncoupled the old connector, replaced with new connector and attached supply line. Repair easy with right part, prior to ordering the right part I had tried a compression fitting and it still leaked. U-tube and others demonstrating repair assured me I was on the right path.
I had three broken baskets for the door and a broken tray in the freezer that needed replacement
I tried looking up the parts list on line as I didn't have the book readily available. This was the site I found that had a nice Break up of the refrigerator and all of the parts. I was able to easily spot the parts I needed, plus the part number and I ordered everything. I received my items quickly and they were packaged well. The installation was very easy and I feel great that I have working parts that look great and I will definitely purchase from these folks again!!!!
Removed 4 Stainless steel screw holding mounting assembly containing ice maker and motor. Unplug large plug from refrigerator inside wall and removed assembly. Closed refrigerator and lay asembly on flat surface. Removed ice maker plug from wire harness. Unscrewed ice maker mounting screws from mounting assembly. Reversed process to install new icemaker. Be sure to turn ice maker plug assembly to fit in holder on back of assembly and tape back in mounting assembly so assembly wil go all the way back in the door without forcing. If done properly, the ice bucket will slide in easily and the door to ice maker compartment will close easily without any problems.