I called LG and followed the instructions given over the phone. The instructions couldn't have been simpler. Disconnect the appliance for several hours and then connect again. I disconnected the appliance overnight, cleaned out the freezer, and reconnected it. Problem solved. Did not need to call a repairman and did not use the clips.
I popped the old switch out of place and then disconnected the wire harness from the switch with a pair of needle nose pliers. I then inserted the harness into the new switch and popped the switch into place. Super easy and fast.
The repair went well. They actually had to replace the motor. This saved me a lot of money having it repaired in this manner. Very professional & pleasant.
Uncoupled the old connector, replaced with new connector and attached supply line. Repair easy with right part, prior to ordering the right part I had tried a compression fitting and it still leaked. U-tube and others demonstrating repair assured me I was on the right path.
Door holder, really simple, remove two phillips head screws, throw awy old holder, replace with new, reinstall two screws. Door basket, slide out old basket, replace with new. Prices were more than fair, delivery very prompt. Will use again.
I had three broken baskets for the door and a broken tray in the freezer that needed replacement
I tried looking up the parts list on line as I didn't have the book readily available. This was the site I found that had a nice Break up of the refrigerator and all of the parts. I was able to easily spot the parts I needed, plus the part number and I ordered everything. I received my items quickly and they were packaged well. The installation was very easy and I feel great that I have working parts that look great and I will definitely purchase from these folks again!!!!
Removed 4 Stainless steel screw holding mounting assembly containing ice maker and motor. Unplug large plug from refrigerator inside wall and removed assembly. Closed refrigerator and lay asembly on flat surface. Removed ice maker plug from wire harness. Unscrewed ice maker mounting screws from mounting assembly. Reversed process to install new icemaker. Be sure to turn ice maker plug assembly to fit in holder on back of assembly and tape back in mounting assembly so assembly wil go all the way back in the door without forcing. If done properly, the ice bucket will slide in easily and the door to ice maker compartment will close easily without any problems.