All Installation Instructions for Whirlpool Refrigerator KTRP22KRWH00

Drain clogging causing water to leak bottom of fridge

After watching videos how to replace went very easy.removed ice maker cut wires replaced switch put back together now working ok so far.

Parts Used:

Bimetal Defrost Thermostat

Ted C from DSRT HOT SPGS, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

ice maker

My husband is an appliance man and he did the work.

Parts Used:

ICEMAKER

Ann from MC CUNE, KS
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Defrost drain clogged with ice

Replaced gaskets on both doors. Followed the online video link that came with emailed receipt. Worked exactly like demonstrated in the video.

Parts Used:

Freezer Door Gasket

Michael from CHICAGO, IL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

install ice maker with all parts for refridgerator with no ice cube hardware on it.

I followed the directions and it worked.

Parts Used:

ICEMAKER

Vincent from THE VILLAGES, FL
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

water leaking in fridge and ice buildup

replacement went easy most of the time was spent removing the ice build up

Parts Used:

Defrost Heater

Darrell from VALPARAISO, IN
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

OLDER Ice Maker on the fritz

Grat help on the phone. We saw repair on YouTube. my wife and I worked it together. It was child's play!! It went beautifully. we were able to "chill out" with ice aplenty!!Thanks...eric

Parts Used:

ICEMAKER

Eric S from Boca Raton, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Wrench set

6 of 14 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Light didnt go on

The light rocker switch wasnt working. I found the part on the web site. It was so easy. I used a screw driver to pop out the old one and pop the new one in. It took 5 min. Thanks!!!

Parts Used:

Refrigerator Door Switch

dorotea from staten island, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Door light switch disintegrated

Very simple fix, remove 3 screws, two connectors to the old switch

Parts Used:

Refrigerator Door Switch

Thomas from Roseville, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

cut old off the door and put new on the door

took door of the refergarator. Then cut old gusket of and clipped the new one on and then put the back. Done!!!!!

Parts Used:

Refrigerator Door Gasket - Beige

George from Albakurky, NM
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set

7 of 17 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The trim broke off when my kids yanked a bag out and it got caught in the door trim.

I removed the broken trim. Then I popped off one of the trim brackets, slid the trim in, and reinserted the trim bracket. I took 1 minute to perform. The part was perfect. Ordering was a breeze because there was a good schematic diagram to select the correct part.

Parts Used:

Door Trim

Evans from Santa Rosa, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Overload was open

New part was similar, except contact blade was for a full 1/4", my model utilizes 1/8". So I cut the blade in half with a hacksaw, filed off the rough edges and reassemblied the connector; attached it to the compressor
Now being a retired electronic engineer; who's great idea was it to hide a klixon inside the connector?

Parts Used:

Overload (Production)

richard from galena, KS
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

4 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

fridge door switch did not work

I removed the switch housing (4 screws), replacing the switch in the housing was a snap. It took 5 minutes, cost $8 and light works like new!

Why didn't I order this part and do the repair earlier? Very simple.

Parts Used:

Refrigerator Door Switch

stu from richmond, VA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Drawer cracked/split

I just slipped the new drawer into place. So easy, even a woman can do it! ( I am female!)

Parts Used:

Refrigerator Crisper Drawer

Yvonne from Fredericksburg, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Bought from a Scratch & Dent, so hinge was bent

The bent hinge caused a bad seal which let in air into the freezer, so there was a ton of frost build up. I ordered the parts, and they came in 2 days! I figured what tools I needed, got my wife to help hold things, and in 20 minutes it was like new.

Parts Used: