Removed oven from cabinet and replaced oven control board, door lock was included in package,installed it also, installed new limit sensors. removing the connections from the old control and putting them on the new one was a little difficult, just have to be gental,plyers worked well, the new control had revised selonids that had 4 terminals and I only had 2 wires, one for bake and one for broil, the selonids had paint dots to show you which ternimal to hook the wires to, yellow on bake and violet on the broil, Lb1 had a stamp on the circuit board next to the side ternimal, the other two ternimals were blank for me. It would be real nice if a diagram was included, even after contacting GE answer center and requesting a diagram, they only had the orginal print that came with the stove, revised the board and not the blueprints, see how that works, call a tech to hook up 2 wires. Put oven back in cabinet and no more error codes.
Parts Used: