Models > JED8230ADB15 > Instructions

JED8230ADB15 Jenn-Air Cooktop - Instructions

All Instructions for the JED8230ADB15
91 - 105 of 195
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
elements were worn and not heating properly
Repair was very easy for anyone to do,Just lift the old element cartridge up and pull out,And insert new the one! Very simple it took less than two minutes.The New element cartridge(stainless steel) Fits perfectly and functions perfectly.Ordered parts on a Saturday and they arrived Monday! impressive!!
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • Michael from Cincinnati, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The original grease filter was damaged in our dishwasher (it is quite fragile) and needed to be replaced.
1. Remove the exhaust vent cover, located in the center of the top of the range. It just lifts off.
2. Swivel the clamp 90 degrees to release the filter.
3. Remove the filter and throw it away
4. Place new filter in place and lock in place by rotating the swivel clamp back 90 degress.
5. Replace the exhaust vent cover
Parts Used:
Grease Filter
  • Martyn from Middletown, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fan Switch Broken and being held only by Electrical Wire Connections
removed two screws under fan cover at end of stove knobs. raised panel with knobs up and removed two nuts that held fan switch housing. installed new switch and moved power connections to new fan. (note: Killed power to range top prior to any repair action)
Parts Used:
Fan Switch - Black
  • Melissa from Buford, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Worn Oven Seal
If you have some mechanical ability it is a eazy fix, remove the 2 screws attaching door to oven, disassemble the back screws, and inner panel, remove oven seal, and reverse the process.
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • Wesley from Avon, IN
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wire on one of the burners was frayed and exposed
took old burner out and put in new burner. No problem. Easy greasy
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • Richard from Baton Rouge, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Our coil elements were looking worn.
We took out the old element cartridges, and plugged in the new cartridges. It was easy, and made our cook top look fantastic!
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • Harriet from Coppell, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
coil element not working
plugged the new one in and it was ready to use
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • Johnny from Trinity, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
element burned out-burners did not work
the new element came, I unplugged the old one and plugged the new one in. 5mins max
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • JohnPaul from Ft. Bragg, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burners were not working, metal was old and destroyed.
I pulled out the old cartridge, cleaned the stove top and inserted the new cartridge. No problem!
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • Karen from Bethlehem, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the elements were old and I only had one set, but had the grill
I just had to pull the old ones out, and pop in the new ones. It took longer to get them out of the box, than to replace them. Thank You for your fast ordering and shipping.
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • Deborah from New Plymouth, ID
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Grease filter was torn and bent
I just lifted out old filter, and put in new one.
Parts Used:
Grease Filter
  • Brent from Rancho Santa Fe, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
part shorted out due to rust
easy...opened box and plugged it in.....
Parts Used:
Stove Cartridge Assembly
  • vivian from west orange, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fan & stove did not operate.
1st removed 2 screws & removed 2 leads ( then the fireworks started/ did not know the power was still in the leads), so removed the power. On the net picked a fan sw. from a picture & ordered it. The service was swift but the part was wrong ( had 3 contacts rather than 2/ I thought by this time they made one sw. for 2 purposes) WRONG.I called in to explain my problem & Susan M. helped me with the right part & excellant service. Thank you Susan.
Parts Used:
Fan Switch - Black
  • Richard from St Louis, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old filter couldn't be cleaned
This was a no-brainer: old filter out, new filter in. In addition to replacing an old, greasy filter, I found that the exhaust fan now draws cooking fumes much more efficiently. So why did I wait the 6 years since we moved into this house to do this???
Parts Used:
Grease Filter
  • William from Goshen, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Filter needed replacement. Old one was falling apart.
Removed old filter, dropped in the new one.
(This really was not a "repair")
Parts Used:
Grease Filter
  • Sophie from Warrenton, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the JED8230ADB15
91 - 105 of 195