Models > GDT535PSM0SS > Instructions

GDT535PSM0SS General Electric Dishwasher - Instructions

All Instructions for the GDT535PSM0SS
91 - 95 of 95
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Another Dead on Arrival UI Board!
Seems to be a common issue - what is not mentioned is how poor this vendor is at processing returns and how long it takes. It took them 2 weeks to acknowledge my return request which was sent the same day the part arrived - and now they say it could take another 90 days because it is a GE component. I have installed electronic boards in so many devices and even have custom built PC's without an issue (unless the board arrives defective - like this one did! The board arrived dead and the anti-static wrap was previously opened (tape was ripped and not secure). I took some pictures and like the other commenter, my old UI board worked/lights up just fine but will not stay that way for more than a few days (and then have to power cycle the main board until it comes back on). It is annoying - but this supposedly brand new (factory tested my @$$) board will not light up or beep at all! It will go back and will also file a dispute with PayPal if these folks continue to drag their feet. I would stay away from this part - nobody else even has this in stock - but somehow they have access to a pile of defective boards...
Parts Used:
CONFIGURED UI BOARD
  • Miles from EASTON, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher door sensor/ mother board
Replaced motherboard, parts select,very helpful in helping diagnose problem! Exchanged parts, credit account after returned parts. Great customer service All good stuff! They brought their A game for this diy-er...
Parts Used:
Door Latch
  • Donald from NASHVILLE, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The lower dishwasher rack was rusting out. The rubber/epoxy coating was coming off causing rack to rust out.
Removed the old lower rack and slide the new one in.
Parts Used:
Lower Dishrack with Wheels
  • Chris from LAS VEGAS, NV
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Connector to sprayer broke
Connected sprayer aligned on bottom of top rack snapped in place. Very easy to install!
Parts Used:
CONDUIT MID Assembly
  • Melissa from BELLPORT, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
3 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old Dishwasher Rack Was Rusted
Piece of cake! Slide old rack out, slide new one in. I wish I had known about this website sooner, would have changed this rack out 2 years ago. Yes, it’s a little different shape than the old one, and Yes, I can no longer put my silverware on the door. BIG DEAL! I would rather move a few dishes around than spend $700. on a new dishwasher. Tell your friends about this website, that will thank you.
Parts Used:
Lower Dishrack with Wheels
  • Elaine from NEWARK, DE
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GDT535PSM0SS
91 - 95 of 95