All Installation Instructions for Frigidaire Refrigerator FRT21IL4FW4

Leaking Door Gasket

Open door remove old gasket, remove new one out of packaging install new gasket

Parts Used:

Refrigerator Door Gasket

Ulrich from Ontario, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

12 of 18 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

the rail broke on the meat drawer holder

I removed the shelf that hold's the rail's then one (1) screw that hold's the rail in place then I replaced the shelf. Simple & Easy!!

Parts Used:

Drawer Support Rail - Right Side

Geronimo from McAllen, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

10 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Leaky Seal

Just snaps in. Pull the old one out push the new one in. It has a groove it fits into no fasteners to undo, Just pull the old one out with steady pressure.

Parts Used:

Freezer Door Gasket - White

Travis from Tecumseh, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

10 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The Gasket was not holding tight and I replaced with a new one.

Just like you showed on you tube.

Parts Used:

Refrigerator Door Gasket

Kebreab from NASHVILLE, TN
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins

9 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Freezer and refrigerator stopped cooling

The site offers a video for this part which worked perfectly. In addition to replacing the part, since the cardboard panel was off, we also cleaned all the dust off of the coils which someone recommended to do annually.

Parts Used:

Run Capacitor

Amy from PITTSBURGH, PA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

8 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Ice maker failed

Watched YouTube video. Very easy. Used my cell phone camera in ‘selfie’ mode propped up in the upper right hand corner of freezer to see the 2 hidden screws.

Parts Used:

Refrigerator Ice Maker Assembly

Mary from SOUTH LYON, MI
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers

9 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken meat drawer support

Took out the broken piece, replaced it with the new support using only a screwdriver, and VOILA, it was finished. Thanks!

Parts Used:

Drawer Support Rail - Left Side

Sue from Ocala, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

8 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken drawer support and drawer'

Drawer support held in by one screw drawer slide in no problem

Parts Used:

Meat Pan

Drawer Support Rail - Right Side

Cameron from Bronx, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

9 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken Handle on Refrig

Once I removed the screw cover by sliding it down the handle wes 3 #8 x 1/2 screws that had to be removed. The handle was switched and screwed back on and a new screw cover was put on. Easy as pie.

Parts Used:

Door Handle

Handle Trim - White

Roger from Lindenhurst, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

11 of 17 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

broken rack on freezer door

just slipped the part in place

Parts Used:

Freezer Door Shelf Retainer Bar

Louis from St Augustine, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

10 of 15 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Door Shelf Was borken held together by duck tape

I receive the part the next day eventhough I paid for 3-5 day delivery. It took lest than 10 seconds to snap into place and now it looks like new.

Parts Used:

Refrigerator Door Shelf Bin

Letitia from OFallon, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

9 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

refrig. door fell off lower hinge

took door off to see damage / what caused it . put door back on with temporary fix. /
looked up parts online / ordered parts online.
received parts very quickly. removed doors again, put on repair parts , tested - ok now.

Parts Used:

Center Hinge Spacer

Single Washer

Lower Hinge Pin

Refrigerator Door Shelf Bin

Patrick from Hollis, ME
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set

18 of 39 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Ice maker stopped working

Took off old part and installed new part

Parts Used:

Water Inlet Valve

Fred from Las Vegas, NV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

11 of 18 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

broken fan with vacumme cleaner

I remembered to unplug first. took the little cover off on the bottom, unscrewed the 3 screws. then just held the base that the fan is on and pulled rite off, pushed the other one rite on. it took me five min, i want to say thanks to parts select, had the part, fast shipping, great job, thank you.

Parts Used: