Enter the code USA15 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on July 1 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
The instructions that came with the new shock absorbers were very detailed and walked me through the repair step by step. The new shock absorbers are much better quality than the old tube style shocks.
Washer was in the garage, and we had a hard freeze. Water in the valve froze, breaking the valve.
Took the top off the washer, removed the valve, installed the new one, back in buisness. It was so easy to order the part, and have the repair done in no time.
easy repair. I went to the back of the washer and removed the two(?) screws that held the top panel on. Then moved to the front of the washer and unscrewed the two screws in the door frame holding the lock assembly. Pulled it up and out from the top of the washer and disconnected the three wire connections. Then I just reversed the process with the new part. It all worked great. This website rocks... Phil Jax, FL
I replaced both shock absorbers that hold the drum on a front loading washer. They both snapped at the base and have since been replaced by a different style shock absorber. There are 2 pins that hold each part in place. I took 5 minutes to replace 3 pins and about an hour to replace the last one, which was in a very tight spot. After much sweating and swearing, I managed to get the pin back in. Was it worth it? ABSOLUTELY! Partsselect.com is a dream for straightforward repairs. This is the second repair I have done on this machine (which is less than 5 years old) and both repairs have cost less than $30.
Took door lock switch out and fished out broken part. Reinstalled switch and installed new striker. Problem solved. Ordered extra striker just in case.
What was not mentioned in the instructions was that the right side pin can not be removed very easilly since there is a large metal box that is mounted directly behind the pin which keeps it from being removed without great effort and potential. I was able to remove the pin without destroying it but it would never go back in the same way because it is impossable to line up the schock, bushing and hole so I installed the pin from the front side and I will take my chances as to how long it lasts. machine seems to be running fine. Thanks
The valve had cracked so water was leaking out from the cracked area.
After getting a quote for $140 for a repair, I decided to try ordering online and hope for the best. I am delighted to say it was incredibly easy! All I had to do was remove the broken valve by unscrewing the water hoses with a wrench and remove two screws that held the valve on with a screw driver. Next, I popped in the new piece, replaced the screws with the screwdriver and attached the hoses, then tightened them with the wrench. Very easy! 10 minutes total.
I followed the great instructions provided on the site and had the old broken struts out in no time. The new ones went in without a hitch and the time it took me to unscrew and rescrew in the back of the machine was longer than the time it took me to replace the broken parts.
Tilted the washer back to take the 2 screws off the bottom to remove bottom plate. Took the 2 nut screws from the bottom of the face plate so that the front of the washer would pull slightly out from the bottom. Removed the 2 screws from the door stricker plate which allowed the door lock assembly to come out through the side of the washer. Unplugged 3 plugs, plugged the new switch in and slid it back into place, put the 2 screws back in to hold it. Reattached the front and the bottom plate. And bingo done. It worked and saved us about $245.00. Very happy!!!
Washer off balance caused springs, shocks to break
Took off the front, and put a come along to rafters in garage to lift tub. Replaced shock asborers, waited for spring kit to be delivered, replacing all. Still isn't working need to check wiring to some compoments to see if a wire is broken. Hope to have it washing soon
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the wash tub was loose and making noise and bouncing all over the place
we removed the back panel of the washing machine, removed the old pins to the shocks and re-installed the shocks and pins. one pin gave us a hard time but it eventually went back in. the job was not to bad to do and now the wash machine is so quiet we can't even tell that it is on : ) this is our second repair that we have done on it ourselves, the first time we had to install a new control unit and spring and that was fairly easy also. who needs to spend alot of money to get their appliances repaired, you can easily do it yourself and save some money, plus we ordered the parts online and received them in about 2 days
Followed the kit instructions to the letter. working around tight clearences was really the only thing to slow me down. The other posts tell the rest of the story better than I can.
My washer was leaking a bit on the left side, apparently from the place water enters from filler. I spent a bit of time inspecting that side of the thing and my jaw dropped when I finally saw the other side of the washer, the upper shock was broken off and the thing was not connected.
I got my parts fast and removing the pins was a bit troublesome but some from access standpoint, but it wasn't hard - just took some extra effort and prying from the head side. Seems to run better with new shocks and no more leaking so far.
