Models > 7761A-71 > Instructions

7761A-71 Norge Dryer - Instructions

All Instructions for the 7761A-71
106 - 120 of 141
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dryer door would not stay closed
I did a quick research online and found PartSelect to have the best price. I ordered my part on Monday 8/6 and to my tremendous surprise FedEx delivered it Tuesday 8/7!! I did not pay for overnight delivery. My son happened to come by that day and he took a small flathead screwdriver, pried the old one out and inserted the new part. Done in 5 minutes! PartSelect will be my supplier from now on.
Parts Used:
Door Catch Kit
  • Ruth B from Hempstead, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
when we were cleaning the fan we discovered the teflon coated guide had broken
the hardest part of fixing it was getting the belt off the roller guide. the actual part was easy to fix
Parts Used:
Front Glide Kit
  • Herbert from GOLD BEACH, OR
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
seal was loose and letting air escape
Pulled the old one off .Dry fitted the new one and pushed the retainers in place,took about 5 minutes.thank you.
Parts Used:
Door Seal
  • David from Hampton, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Lint Filter fell apart
The new filter did not fit properly. Used a buter knife to remove teh lint build up and WOO HOOO! the new filter fits perfectly :-)
Parts Used:
Lint Filter
  • Lisa from Mesa, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Male end of door catch broke
First, I replaced the male end which was just two screws and simple replacement of pushing the fastener into the door frame. When finished I noticed the female end was damaged as well. Glad the female part came as well. This required taken off the front trim around the door (four screws - 2 each side) and then the door. The installing of the female end was easy with a little push. The damaged female end was already hanging out so easy to grab and remove. Otherwise I would have had to remove the front panel. Note You need to put the door trim back on before reattaching the door.
Parts Used:
Door Catch Kit
  • George from Hamden, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Latch was broken so door wouldn't close
This was real easy just slid the latch in front panel and attached to latch assembly to the door. The repair was about 45 seconds.
Parts Used:
Door Catch Kit
  • Doug from Kearney, NE
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Door seal beginning to rot
PS2031037 Door Seal We were amazed at how quickly to find the site, order the part, RECEIVE the part. In just a matter of a few days, dryer was once again functioning properly. Seldom do Retailers get it, YOU GUYS GOT IT! Thanks very much
Parts Used:
Door Seal
  • Patricia from dumfries, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
the plastic latch broke
im a car mecanic it was easy
Parts Used:
Door Catch Kit
  • greg from phoenix, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
loud noise
replaced belt first didnt fix the noise so i replaced rear drum support roller kit and that fixed the noise this was a cheap fix cost me about 70.00 dollars verses a new dryer thank you your website was a big help
Parts Used:
Rear Drum Support Roller Kit
  • Karen from Pearl, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
blower wheel wore out
ordered a new fan from your web site and replaced it. it only took a couple of days to get the part thanks for such good service well pleased will use you again in the future
Parts Used:
Blower Wheel - B/10 Models
  • Nancy L. from Wardensville, WV
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!
The blower fan in the dryer broke into pieces and was flying out threw the dryer vent
Removed the front of the dryer removed the casing from the front of the blower and put the new fan in. And now it works great Thank you
Parts Used:
Blower Wheel - B/10 Models
  • Delores from Palmerton, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Worn Out Broken Door Latch
I would like to say first of all that I was amaized and pleased at how simple the ordering of this part was and while looking at the parts diagram on you website I noticed the door swing was optional and could be easily changed and the dryer came from the factory with a latch installed on both sides of the door. In our laundry room the dryer sits to the left of the washer and the door to the dryer opened to the right which has always been a slight inconvenience. . . So instead of changing out the broken part, I took the door and hinge off with my cordless screwdriver (6-8 screws) and turned it around and remounted it on the opposite side. . . Simple! I never took the new part out of the ups envelope. Now I have a spare so I taped the new part in the envelope to the back of the dryer in case I ever need it and now we have more convenience with the door swinging the correct way. Sweet deal! Took less than an hour. Thank you for making this task simple. Chuck g.
Parts Used:
Door Catch Kit
  • chuck from odessa, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
dryer filter was torn
Replaced it.
Parts Used:
Lint Filter
  • judy from sun city, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
couildn't see the belt tensioner and hold it back at the same time
I drilled two holers in the side of the cabinet 1 inch apart. I put them at the same height as the tensioner spring. I put the string through 1 hole and around the tensioner. I pulled the string through the other hole and had my son hold the tensioner back while I reached in and lined up the belt on the tensioner while my son let out the string slowly.
Parts Used:
Rear Drum Support Roller Kit
  • Matt from Norristown, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
terminel block melted
replaced the terminal block
Parts Used:
Terminal Block
  • Lonnie from Soda Springs, ID
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 7761A-71
106 - 120 of 141