Models > 6GD25DCXHS10 > Instructions

6GD25DCXHS10 Whirlpool Refrigerator - Instructions

All Instructions for the 6GD25DCXHS10
91 - 105 of 753
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Worn out door chute
Pry open the front dispenser outer cover. Remove a screw holding ice door dispenser unit, remove old door chute, remove and place coil kind of stuff (connecting to panel) old chute to new one and reinstall.
Parts Used:
Ice Dispenser Door Chute
  • Murali from Rochester, MN
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
14 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broker door on ice shute
hardest part was getting up the nerve to pull front cover because it is plastic afraid i would brake it pull from bottom and lift up one screw holds old door inplace uplug electric new door doesn't have electric that it.
Parts Used:
Ice Door Kit
  • John from Willington, DE
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
14 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
leaking water dispenser
worked great parts were perfect!
Parts Used:
Screw Strain Relief Levers Retainer/Clip Ice Guide
  • roxana from dinuba, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
12 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Both parts were broken and required replacement.
The broken part was removed and new part installed without any trouble.
Parts Used:
Refrigerator Crisper Drawer with Humidity Control Complete Dairy Compartment Door - Clear
  • Patricia from Inglewood, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
12 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bottom and middle door bin broke
it snapped right in easy .
Parts Used:
Refrigerator Door Shelf Bin Refrigerator Door Shelf
  • Fred from Phoenix, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
10 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice container wouldn't dispence
I simply replaced the entire ice container and auger assembly. I intend to repair the old assembly for use as a spare if the new one ever has problems in the future.
Parts Used:
Ice Container and Auger Assembly
  • Dennis from Cheney, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
10 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My drawer had been broken and I needed a new one.
When I took the pan out of the box, it was not the exact same as the one I had. But it fit perfect. The only hard part was the fact that it looked so good I had to clean the entire fridge side. (Smile)
Parts Used:
Refrigerator Crisper Drawer With Handle
  • Jennifer from Birmingham, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Worn Down Upper And Lower Cam
Took off refrigerator door from top hinge and lifted off. A little difficulty getting worn out parts off (needed dremel to drill out worn plastic); replaced with new parts, the screw head holding on the part was starting to be worn as well but still worked. If I hadn't got to this repair soon the bottom of the door aluminum would have total worn out as it is, it has a deep groove but not noticeable. The new cams also force the door closed tight instead of slightly ajar at times.
Parts Used:
Lower Door Closing Cam Door Cam - Black
  • Jose from Corona, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Wrench set
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The shelf runner broke
Took out the old one and put in the new one. No tolls required. It did give me the opportunity to clean the back wall of the refrigerator.
Parts Used:
Crisper Cover with Glass
  • Andrew F from Media, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
10 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Crisper Frame And Pan
Jus took me seconds to replace both items. No problem.
Parts Used:
Crisper Cover with Glass Refrigerator Crisper Drawer with Humidity Control
  • Mauricio from National City, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
9 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
35 year old water tube became brittle and cracked; leaking water
Unscrewed clamp holding water tube to refrigerator ice maker. Pulled water tube from ice maker and water valve inlet. Cut the new tubing to the exact same length and inserted one end to the water valve inlet and the other end to the ice maker then screwed clamp holding water tube back to the refrigerator ice maker.
Parts Used:
Water Tube Kit
  • Melvin from OPELIKA, AL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Chrisper pan support cracked due to overfilling
removed old shelf support after taking out the glass and support. New part was a perfect fit that was a "shap: to put in.
Parts Used:
Crisper Cover with Glass
  • David from Lenexa, KS
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
9 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice chute broke
Just like they told me to do.Insert bottom then sides.
Parts Used:
Ice Guide
  • Cathy from North Liberty, IA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Both outside door handles turned very beige
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discoloring refer handles. Thank you
Parts Used:
Spray Paint - 12 oz. - White
  • Howard from Boynton Beach, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
22 of 53 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door bin was broken
took old bin out replaced with new , two minute job
Parts select is an easy co. to do business with THANKS Andrea
Parts Used:
Refrigerator Door Shelf Bin
  • Andrea from Cornelius, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 6GD25DCXHS10
91 - 105 of 753
Back to Top