41799390810 Kenmore Washer Dryer Combo - Parts

Door Strike

★★★★★

★★★★★

(7)

The door strike is attached to the door of your dryer and holds the door closed. If your dryer door is not closing, this might be due to the door strike needing to be replaced. This is a simple repair... Add to cart

Heater Assembly

★★★★★

★★★★★

(10)

This dryer heating assembly has 5/16" terminal on the housing. Add to cart

Tub Seal Assembly

★★★★★

★★★★★

(5)

If you have a leaky washer, then your tub seal may be the culprit. The tub seal assembly may also be known as the washer tub seal, and is a part for your washer. The function of this piece is to make ... Add to cart

Tension Idler Pulley

★★★★★

★★★★★

(5)

The idler pulley on your washing machine allows the drive belt to operate smoothly. If your washer is not spinning or agitating, makes too much noise, or you notice a burning smell when it is operatin... Add to cart

Screw This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T... Add to cart

SCREW Sold individually. Add to cart

Washer Lid Lock with External Safety Switch

★★★★★

★★★★★

(1)

Mounting bracket on this part replaces old style ( You may need to drill off old bracket before mounting new lock).

Blower Wheel

★★★★★

★★★★★

(3)

This blower wheel is a genuine OEM replacement part for your dryer. The wheel can become damaged through use of the dryer, especially if the drive motor shaft, which it is attached to, becomes damaged... Add to cart

Single Clip

★★★★★

★★★★★

(1)

Sold individually.

Agitator

★★★★★

★★★★★

(1)

This is an agitator that is compatible within various makes and models of washer, and is used to move, or agitate, the clothes and soap/water mixture around within the tub of the washer. This agitator... Add to cart

Agitator Drive Block

★★★★★

★★★★★

(1)

The agitator drive block rotates the agitator assembly in your washer. If the drive block breaks down due to wear and tear the agitator will stop working. If you notice that your washer is making loud... Add to cart

Spin Bearing

★★★★★

★★★★★

(1)

The spin bearing, used for your washer, is located at the bottom of the outer tub near the transmission. The spin bearing carries the transmission shaft in the drive system, therefore ensuring the sha... Add to cart