Enter the code USA15 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on July 4 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
Light rocker switch broke and refrigerator light couldn't go on.
I just popped out the old switch with a flat head screwdriver. Removed the connections and then installed new switch by reversing steps. Popped in back in and the light went on.
No Problems, Charles is "NATURAL BOTN" Mechanic, who stives to SOLVE PROBLEMS, which he does quite admirably. I am fortunate to have such a son as him. Anything mechanical that needs repairing, HE CAN DO IT! His proclivity for fixing stuff is amazing and saved me THOUSANDS of dollars over past year. Unfortunately(fortunately for ME) he cannot find a JOB. I am extremely satisfied with finding and using your erice. Thank you very much. You are VERY worthy of TRUST.
Just like the video showed me.It still does not work. Have to turn it off and on to make it start up.I also replaced thermostat in freezer. Does not work.
I pulled down the wire around the glass cover. . . Released on end of the wire from its holder being careful to not let the glass cover drop. Unscrewed the bulb and replaced with replacement. Easy, easy.
The repair was relatively simple. The hard part was diagnosing the problem. Two of the sheet metal screws were hard to get at. The online support helped in isolating and fixing the problem. The frig works fine again.
Plastic Cams on frig door cracked in halk/door wouldn't close easily
Removed the top hinge (4 screws)-lifted the door off of the lower hinge-replaced both halves of the cam kit and mounted the door and reattached the upper hinge. Probably took about fifteen minutes total.
The worst part was unloading the door shelves. Removed upper hinge cover and hinge hex screws. This allows the door to be removed. Lay the door on side. Remove screw that holds cam in place. Replace broken cam with new piece. Put the door back on the hinge pin and replace upper hinge screws and cover. Now reload all of the stuff.
