All Installation Instructions for Kenmore Refrigerator 2537888401B

No shelf in Freezer compartment though obvious slots provided.

Used model # of frigidaire on your web site... reviewed parts available... noticed shelves abailable... zoomed in to measure using crosshatch background... measured my freezer compartment... seemed doable... ordered shelf... receivednext day... attempted to slip in slots... had to grind off 3/16th inch on two legs... slipped in... Perfect!

Parts Used:

Freezer Shelf

Joe from Dallas, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins

10 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Leaking Door Gasket

Open door remove old gasket, remove new one out of packaging install new gasket

Parts Used:

Refrigerator Door Gasket

Ulrich from Ontario, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

12 of 18 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

refrigerator door would not fully close

Took old gasket off and put new gasket into place. Part came in the mail in 2 days. Hardest part was finding the model number of the refrigerator.

Parts Used:

Refrigerator Door Gasket

Elizabeth from Chicago, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

10 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken Refrigerator Door Shelf Retainer Bar

We took off the broken bar and put on the new one. It clips on. Took about 10 seconds and could have been done by a 5 year old.

Parts Used:

Door Shelf Retainer Bar

Ward from Stockton, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

10 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Motor had failed due to ice ejector frozen to tray.

Removed the ice maker. Took off the cover and proceed to remove the motor. The only trick was to dis-assemble the electrical connector to replace the wires. I chose to do this rather than splice the new motor into the existing system and it was simple with a little patience.

Easiest repair to make and half / third the money for a new ice maker. The in-laws have ice again (it was over a year).

Parts Used:

MOTOR-ICE MAKER

Christopher from Middletown, CT
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

10 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Gaskets needed replacing

I watched u-tube and did the same thing. It was simple.

Parts Used:

Refrigerator Door Gasket

Freezer Door Gasket

Claire Ellyn from Inverness, FL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins

10 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

FREEZER WAS COLD FRIDGE WARM

YOU TUBE VIDEO POINTED ME IN THE RIGHT DIRECTION. USED MULTI METER TO CHECK FOR VOLTAGE. NONE, REPLACED DEFROST HEATER. WORKS LIKE A CHARM, PART DELIVERED TO MY DOOR FOR LESS THAN $60.00, IN TWO DAYS FROM PARTSELECT. FIXED IT MYSELF FOR LESS THAN THE COST OF A SERVICE CALL.

Parts Used:

Defrost Heater

JEFF from OLIVET, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers

10 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The Gasket was not holding tight and I replaced with a new one.

Just like you showed on you tube.

Parts Used:

Refrigerator Door Gasket

Kebreab from NASHVILLE, TN
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins

9 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken bar and seal

Snapped in the bars and with the seal once on the track went right on

Parts Used:

Door Shelf Retainer Bar

Mark from Sandwich, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

10 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Crisper Pan

Just removed the broken pan and installed the new one within 2 minutes. Really simple

Parts Used:

Refrigerator Crisper Pan

Deepankar from Novi, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

13 of 22 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Ice maker failed

Watched YouTube video. Very easy. Used my cell phone camera in ‘selfie’ mode propped up in the upper right hand corner of freezer to see the 2 hidden screws.

Parts Used:

Refrigerator Ice Maker Assembly

Mary from SOUTH LYON, MI
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers

9 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Ice maker stopped working

Took off old part and installed new part

Parts Used:

Water Inlet Valve

Fred from Las Vegas, NV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

11 of 18 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

broken fan with vacumme cleaner

I remembered to unplug first. took the little cover off on the bottom, unscrewed the 3 screws. then just held the base that the fan is on and pulled rite off, pushed the other one rite on. it took me five min, i want to say thanks to parts select, had the part, fast shipping, great job, thank you.

Parts Used: