25331870106 Kenmore Refrigerator - Instructions
Sections
Manuals
Parts
Questions & Answers
Symptoms
Videos
Instructions
All Instructions for the 25331870106
Gaskets needed replacing
I watched u-tube and did the same thing. It was simple.
Parts Used:
Claire Ellyn from Inverness, FL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
10 of 12 people
found this instruction helpful.
Thank you for voting!
The Gasket was not holding tight and I replaced with a new one.
Just like you showed on you tube.
Parts Used:
Kebreab from NASHVILLE, TN
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
9 of 10 people
found this instruction helpful.
Thank you for voting!
Broken bar and seal
Snapped in the bars and with the seal once on the track went right on
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
10 of 13 people
found this instruction helpful.
Thank you for voting!
Ice maker was not making ice
I replaced the solenoid first because the ice maker was not getting water. After replacing the solenoid valve, I waited about 1/2 an hour, still no water. So, I ordered a replacement ice maker. I then installed the replacement ice maker, waited a 1/2 an hour, still no water. Then, I waited overnight. Yeah, ice! WORD OF ADVICE. WAIT OVERNIGHT TO SEE IF THE ICE MAKER CREATES ICE. Not sure how long a cycle takes, but it's longer than you would think. Hope your installation is a success!
Parts Used:
Jeffrey from Indianapolis, IN
Total Repair Time:
Less than 15 mins
9 of 10 people
found this instruction helpful.
Thank you for voting!
Crisper Pan
Just removed the broken pan and installed the new one within 2 minutes. Really simple
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
13 of 22 people
found this instruction helpful.
Thank you for voting!
Broken meat drawer support
Took out the broken piece, replaced it with the new support using only a screwdriver, and VOILA, it was finished. Thanks!
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
8 of 8 people
found this instruction helpful.
Thank you for voting!
Broken drawer support and drawer'
Drawer support held in by one screw drawer slide in no problem
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
9 of 11 people
found this instruction helpful.
Thank you for voting!
Ice maker failed
Watched YouTube video. Very easy. Used my cell phone camera in ‘selfie’ mode propped up in the upper right hand corner of freezer to see the 2 hidden screws.
Parts Used:
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
9 of 11 people
found this instruction helpful.
Thank you for voting!
Retainer bar broke
Removed bars from doors snapped in new replacements
Parts Used:
Kathy from Weyers Cave, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
9 of 12 people
found this instruction helpful.
Thank you for voting!
broken rack on freezer door
just slipped the part in place
Parts Used:
Louis from St Augustine, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
10 of 15 people
found this instruction helpful.
Thank you for voting!
Ice maker stopped working
Took off old part and installed new part
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
11 of 18 people
found this instruction helpful.
Thank you for voting!
Bottom retainer bar on door shelf broke
took replacement part out of box and slipped it right into placed. could not have been easier
Parts Used:
Elizabeth from Shelbyville, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
8 of 10 people
found this instruction helpful.
Thank you for voting!
Cracked drawer
I slid out the old drawer and slid in the new drawer. Easy as that! I would recommend this website to anyone.
Parts Used:
Jaime from Harrisburg, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
8 of 10 people
found this instruction helpful.
Thank you for voting!
ice maker quit making ice
I basically followed the instructions offered when i searched for the ice maker. It was relatively easy to do, I undid the 2 screws holding the ice maker to the side of the freezer, the was the tricky part, holding a mirror so i could see the slots of the screws. loosened them, disconnected the electrical connection and reversed the process for the install. It took about 25 minutes and i was back making ice.
Parts Used:
Barry from Middletown, DE
Total Repair Time:
15 - 30 mins
8 of 10 people
found this instruction helpful.
Thank you for voting!
Rust on freezer shelf
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
8 of 11 people
found this instruction helpful.
Thank you for voting!
All Instructions for the 25331870106