the refrigerator door was hard to close, and upon inspection I finally decided that the light switch was making the door hard to close.
I removed the door actuated light switch with my index finger and thumb on my right hand. I then removed the two wires from the switch. I noticed that the new switch had different look to it,I think Frigidaire must have had a problem with the original design of the switch. Reassembly was just replacing the two wires and putting the new switch in place, and no more door closing problem.
Rental Unit Refrigerator, broken shelf retainer bar & missing end caps
Need to repair refrigerator for new renters. Ordered parts and received them two days later. Installed retainer bar with end caps into refrigerator door same day parts received.
Slip the endcap off the door--- no tools required for that. Use flat end of screwdriver to loosen the bracket holding the door bar into the endcap. The bar slides right out, is easily replaced, and the endcap slips right back on to the door.
The retainer bar was missing from a refrigerator in our rental property. A tenant had broken it and thrown it out. I found the model # on the appliance and looked up the parts diagram on the PartsSelect website and found what I needed. I placed the order one day and had the parts 2 days later! Unpacking was the hardest part. The parts just snapped together to make up the complete retainer unit. Then I just fit the unit onto the formed clips on the door shelf. I'd cosider this a " simple" job.
frezzer iceing over and not cooling the refrigerator
Just removed the two screws and unpluged it. Then I pluged the new one in and replaced the screws. It runs like a brand new reffrigerator. Thanks for the fast delevery. Will do busness with you in the future.
Snap out the old, Snap in the new. With a "Special Needs" child at home, doors are slammed. Inside retainer bars take abnormal abuse .. Parts Select, "Saves the day" and I have a HAPPY Landlord.
I found the part on PartSelect.com, ordered it, received it, and installed it in less than 3 days. Thank you PartSelect.com! I wish everything was this easy.
Freezer built ice, fridge not cold enough and running constantly.
Removed front low grill, removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the wires. Reversed process to install new timer.
door shelf retainer broke, I thought about door replacement, all kinds of ideas went through my head none of them fisable, until I happened on part-select my problem was solved.
measured lenght of parts looked at parts available and matched the size and use together slip broken part off door replaced with newpart. reinstall retainer to to door no tools needed.
