Surface Element Infinite Switch Kit Specifications
This switch controls the stove top surface burner.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range.
This part works with the following products:
KitchenAid, Whirlpool, Inglis.
Part# 8203538 replaces these:
AP3738025, 1059868, 8203538, 9752315, 9753499
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken bunner control and knob.
1. Slide out stove & unplug. 2. Remove stove top light top plate (a snap fit - do with care - a little awkward). 3. Remove bulb. 4. Remove two silver head Phillips screws that were under bulb. 5. Control panel swings face down towards stove top. 6. Pull off switch knob (spring pressure clip holds knob on switch shaft) and remove two silve
... Read morer head Phillips screws to release the old switch. 7. Follow instruction sheet that comes with the infinite switch to transfer wire connections to new switch. 8. Reassemble everything in reverse order. 9. Clean up before pushing stove back in.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carol Jensen
June 24, 2019
I have a Jenn-Air electric cooktop stove and need to do some repairs. How do i know which switch kits will work? I found surface unit switch kit ap4087111 a few weeks ago. Now when i type in that number, it brings up ps2076107. Is it the same thing with just a higher price? And which knobs work with it? I also want to replace the surface burner receptacle (that the burner unit plugs into.) if ps1570190 the right part for that?
For model number 2375/90ERS
Hello Carol, thank you for your question. The burner switches are PartSelect Number: PS2076107, which can be used on any burner. The part number AP4087111 is not our part number but the same manufacturers part. The knobs for this unit are PartSelect Number: PS11757562, and the receptacle is PartSelect Number PS1570190. I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Theresa
January 30, 2023
Dual element front left. Both elements work but do not cycle on and off with the heat setting. They are either ON or OFF regardless of where the knob is set. Which part will rectify this issue? Thanks, Brian.
For model number YKERC507HW1
Hi Theresa, thank you for reaching out. The issue is probably with the element switch and you may need to replace it with part number PS972604. We hope this solves your problem! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mary
October 15, 2017
Front left burner will not not work. What part do i need. It is the dual burner.G
For model number Kerc507ewh1
Hi Mary,
Thank you for your question. It could be either the burner itself or the switch that is the problem. I would recommend testing both with a multi meter. Good luck with your repair.
Was this helpful?
Thank you for voting!
Annie
May 12, 2023
Hello,
My large dual burner (front left) is really wacky. At first, It was always on as if on high, wether the knob was on low or high. Now, it turns on and heats on the high setting but after a few minutes I kicks it down to what could be the lowest setting without us changing the knob position. In order to make it work on High, I have to turn it of and then on to the high position. But then again, it does the same thing a few more times until I finally decide to give up and try to cook dinner for 5 on a small burner ....
Help please!
For model number YKERC507EW2
Hello Annie, thank you for the question. According to our research, you may need to replace the surface element infinite switch, part number PS972604. We hope this helps!