Enter the code USA15 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on July 4 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gary
December 19, 2023
Is there a test for the damper assembly? Upper cabinet too cold? Removal and replacement instructions.
For model number GDS20SCSDSS
Hi Gary, thank you for your question! You will need to test the damper control as well as the damper motor using an OHM meter. Prior to testing, the refrigerator should be unplugged. Your refrigerator control usually has two terminals. When the control signals the damper to open, the contact gets closed, leading to continuity across the terminals. In case you have just two terminals on the control, you can bypass across the two wires and re-plug the refrigerator. The damper should close when you do this. If it does not, check for 120 volts, going to the damper motor. To remove the damper, follow these instructions: Remove your shelves and drawers, then the middle shelf bracket will have two plastic covers under which you will find a couple of screws. After removing that screw, damper assembly should be ready to pull out. We hope this information helps!