This replacement magneto is specially designed for use with Briggs and Stratton engines installed on Toro lawn mowers. The purpose of this item is to supply electricity for the ignition system. It is sold individually. Please note a spark plug boot is sold separately.
Please note, steps to replace this part may differ based on your equipment. However, the basic steps would be the same. To complete this repair you should need a screwdriver set.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Greg S - September 5, 2019
Verified Purchase
Direct replacement for my Briggs and Stratton.
Direct replacement for my Briggs and Stratton. It took about 15 mins to install, that's including removing the lawnmower cover.
★★★★★
★★★★★
Ronald H - May 31, 2018
Verified Purchase
Mower running again
Part came fast,perfect fit,starts on first pull.
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
8 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Charles
March 18, 2023
Does this magneto fit my mower
For model number 122t02-0183-b1
Hello Charles, Thank you for your inquiry. We have researched the model number you have provided and confirm that this part will fit your engine model. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Lawrence
September 20, 2022
What is the distance (in inches please) between the mounting slots on the engine coil?
For model number Briggs 12J882
Hi Lawrence,
Thank you for your question. The distance between the mounting slots on the armature magneto is approximately 2-3/4 inches. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Lawrence
September 21, 2022
I measured, center to center the mounting posts for the coil on this Briggs engine. It is 2 and 3/8". Most of the coils I've seen are a tad wider at the mounting point and will not fit onto the mounting posts. Can you tell me the correct part number for this model Briggs? It is on an old Scott's (Murray) mower. thanks
For model number Briggs 12J882
Hi Lawrence,
Thank you for your question. There are 2 armature magnetos listed for your engine. The part number listed under your model number for the armature magneto that comes with the snap in spark plug boot is PS9290113. The part number listed for the armature magneto that you will need to purchase an air vane for is PS9044018. The part number listed for the air vane is FIX9148750. If you need help placing an order for these parts, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
We have a Toro 20039 Serial # 220001110 with a Briggs & Stratton 122607 0118 E1 011001 FA engine. We need a new magneto armature. The Toro parts diagram call for a # 802574. The distance between the mounting post is 2 3/8 inches, center to center. Is the 590454 the correct replacement part. Thanks so very much for your assistance.
For model number 20039
Hi Eric, thank you for reaching out. Yes, the magneto armature, part number PS9044018, you have mentioned is the correct replacement part for your model. We hope that helps!
Was this helpful?
Thank you for voting!
Arthur
July 23, 2019
Will this fit my engine and how long to get it thanks
For model number 128802-0211-01
Hello Arthur, thank you for your question. Yes this Armature-Magneto part number PS9044018 is compatible to your engine. For shipping information please contact customer service by phone or by email at customerservice@partselect.com. Thank you.
Was this helpful?
Thank you for voting!
Rosa
July 15, 2021
This says it should fit my Briggs and Stratton mower, but it looks nothing like the original one on mine that I pulled off. I was going to try a different one off another Briggs and Stratton mower since they looked the same, but the mounting bolt holes are not the same. So I was wondering if they just changed the look of the ignition coil or if this one really won't fit my mower?
For model number 124T02-0205-B1
Hello Rosa, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS9044018. This has been updated by the manufacture band may look different but is still compatible for your model. We hope this helps!
Was this helpful?
Thank you for voting!
HUGH
September 29, 2021
The magneto listed for the model number does not look like the one that came off my engine. What is the magneto needed for this model.
For model number 126t02-0342
Hello Hugh, thank you for your question. We have researched the model you have provided, and we would suggest the Armature-Magneto, part number PS9290113. We hope this helps!
Will this fit on a craftsmen mower? Model # 917.388522 It's about 15 years old. Thank you, Bill
For model number 123Ko2-0235
Hello William, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect #: PS9044018. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!