This part is the replacement inlet valve for your dishwasher. It is approximately 4-1/2 inches by 3-1/2 inches. The water inlet valve in your dishwasher connects to the water source and solenoid wires, and ensures the tub has the right amount of water entering it. If your dishwasher continues to fill after it is full, or if it fills slowly, you may need to replace this valve. Another indication that your valve is damaged and will need to be replaced, is if you notice it is leaking when the dishwasher fills up. Before you begin this repair, be sure to disconnect the water and power sources from your washer. This part is sold individually and is an authentic OEM part.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your LG Dishwasher Dishwasher Water Inlet Valve
Troubleshooting
This part fixes the following symptoms:
Leaking | Will not fill with water
This part works with the following products:
Dishwasher.
This part works with the following products:
LG, Kenmore.
Part# 5221DD1001E replaces these:
AP5804631, 5221DD1001C
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
5 Stars
2
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Gail J - January 15, 2022
Verified Purchase
Great help in getting the correct part!
They really were good with service and quick delivery.
★★★★★
★★★★★
Ed R - May 21, 2019
Verified Purchase
Fast shipping. Works GREAT!
Works Great
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
February 28, 2023
I need a water inlet valve 12 volt can you help ?
For model number Ldt7797bm
Hi James, thank you for your question. The compatible part that you are looking for is the water inlet valve, part number PS8769826. It supplies water to the dishwasher. This solenoid valve is rated 12 Volt, DC. We hope this information is useful!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Donna
February 23, 2022
The lights are blinking and the dishwasher won't run
For model number ldf5545st
Hello Donna, thank you for writing. The first part we recommend checking is the Door Latch and switch Assembly PartSelect Number PS12588938. If that part tests ok, then replace the Control Panel Assembly PartSelect Number PS12374319. We hope this helps and good luck with your repair.
Hi, The dishwasher tries to start but no water flows, there is a smoking circuit smell, then after 3 minutes it beeps and flashes “LE” on the display. Could a shorted coil on the inlet valve be the culprit? Don’t want to spend $80 on the part if it is likely something else. Is there a coil resistance specification? I have not removed anything yet.
Thanks!
For model number LDP7808ss
Hello Robert, thank you for reaching out. The LE error code indicates issues with the motor or wiring harness between the motor and the control board. We recommend you check the wire harness, part number PS12715214, for any damages and replace them if they are damaged or burned out. We hope this solves your problem!
We are getting squeeling noise periodically during cycle. Mostly later in cycle around rinse, drain period. NO ERROR CODES SHOWING! I have changed the drain pump. No difference. Looking now to inlet water solenoid valve as may be sticking and transmitting squeeling sou d down into system. US, 120 unit, not sure which voltage model at the water solenoid . Can you advise correct parts ? Price. Thanks in advance.
For model number LG Dishwasher 2 yrs old LDFN4542S
Hello James, Thank you for your inquiry. Researching your model, part# 5221DD1001E would be the correct water inlet valve. You can use a multimeter to test the valve for continuity, and we have included a link to our article on how to test it. We would also recommend checking the circulation pump and motor, and the diverter motor. The current prices are listed on our website. We hope this helps.