Make sure you haven't got the discount earlier.
Interlock Cover WD12X10401
Fits your GLD5800L00CC Dishwasher!
★★★★★
★★★★★
Rated by 4 customers
Easy
15 - 30 mins
Ratings submitted by customers like you who bought this part.
Fits your GLD5800L00CC Dishwasher!
PartSelect Number PS8756214
Manufacturer Part Number WD12X10401
Manufactured by
GE
Product Description
Interlock Cover Specifications
This is a replacement interlock cover for your dishwasher. The interlock cover protects the door latch assembly, and prevents some of the smaller more important parts from being damaged or going missing. This part is made of gray plastic and is approximately 3.5 inches by 1.5 inches. To replace the interlock cover, you will have to use a Phillips-head screwdriver to separate the inner door panel from the outer door panel. At this point you can access and replace the interlock cover, which simply snaps in and out of place. This part is sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start | Door latch failure
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Hotpoint.
Part# WD12X10401 replaces these:
AP5792846, WD12X10194, WD12X10272, WD12X10323
Customer Reviews
Average Rating:
4 Reviews
★★★★★
★★★★★
4.0
Filter By Rating:
-
5 Stars
-
4 Stars
-
3 Stars
-
2 Stars
-
1 Star
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Karen B - December 9, 2020
Verified Purchase
Quality part
Quality part don’t know why old one broke. We have not used dishwasher for years after buying house with just two of us hand washed.
Wanted to get DW working all that was wrong with it was this plate which had two broke off tabs, don’t know how that happens. Ordered 3 just in case they break
Have ordered from this parts supplier before always good price, easy check out and fast delivery.
★★★★★
★★★★★
Michael B - November 21, 2019
Verified Purchase
Perfect fit a works
Item snaps right on and works perfectly. It was very slightly different than my old one but it still worked perfectly.
★★★★★
★★★★★
John P - September 10, 2019
Verified Purchase
Part Broke Immediately
I ordered this part and installed it. It fit perfectly(so it gets a star for that). However, I needed to take it off again and the latches broke off when I tried to take it off. There was no flexibility in the plastic and it was weak plastic. The other part I ordered was fine but this broke immediately.
★★★★★
★★★★★
Maurice P - June 19, 2018
Verified Purchase
Work great
The right part, worked great
- < Prev
- 1
- Next >
Back to Top
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 4 reviews.
What's this?
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
a couple of retaining ears were broken from the cover allowing the the switches and plunger to move out of place
took screws from inside door panel and replaced the cover taking care not to allow plunger and spring to pop out put panel in place and screwed down
-
charles from royal oak, MI
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher did not start
The repairman diagnosed the problem as a control board failure and quoted a $350 bill. I self-diagnosed it as a failed interlock switch -- and found out that the switch was OK but the cover was cracked, preventing the switch from functioning normally. Total repair bill - $1.50!
Other Parts Used:
-
Maksim from Falls Church, VA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
11 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cover, Interlock Heats Ups And Bends Causing Switch Problems
Ordered your new and improved interlock cover made with better plastic (thank you). Your new spring is also better. It's bigger and longer and is now the right size. (Thank you). Your parts are better than oem. The interlock is easy to get to. The oem one is black and you can see that it is bulged. The replacement one is gray speck
... Read more
led with white and black. You can see the improvement by just making a comparison. Just unclip the old one and clip in the new one. . Repace panel cover. Now it works and should work now for many a year. Thanks! Parts select.
Read less
Other Parts Used:
-
JAMES from MAYFIELD, UT
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
15 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher wouldn't start/reset
Very simple. Took off back cover with screwdriver. Popped off back cap found in center top inside. Replaced spring and white stick looking thing. Put black cover and then back panel back on. Instantly worked again.
Other Parts Used:
-
Jessica from Chicago, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
7 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Back to Top
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Back to Top
You May Also Need
?
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS8756214
Manufacturer Part Number: WD12X10401
Manufacturer Part Number: WD12X10401
Brand
Model Number
Description
Back to Top
Interlock Cover
$
9.19
On Order
✖
Stock Status
In Stock
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.