Enter the code USA15 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on July 1 at 11:59pm EST.
DIVERTER Assembly KIT WD35X10386
Fits your GDT530PGD1BB Dishwasher!
★★★★★
★★★★★
Rated by 1 customer
Very Difficult
More than 2 hours
Ratings submitted by customers like you who bought this part.
Fits your GDT530PGD1BB Dishwasher!
PartSelect Number PS7783379
Manufacturer Part Number WD35X10386
Manufactured by
GE
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric.
Part# WD35X10386 replaces these:
WD18X10052
Customer Reviews
Average Rating:
2 Reviews
★★★★★
★★★★★
5.0
Filter By Rating:
-
5 Stars
-
4 Stars
-
3 Stars
-
2 Stars
-
1 Star
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Benjamin R - January 4, 2021
Verified Purchase
Worked great
The diverter assembly kit fit right on as intended. All necessary parts came included.
★★★★★
★★★★★
Thomas J - April 27, 2020
Verified Purchase
Part fit exactly as it should have - kit contained all necessary clamps
The part was received in great condition and fit exactly as it should have. My dishwasher is now repaired and working as it should.
- < Prev
- 1
- Next >
Back to Top
Customer Repair Stories
Average Repair Rating: 1.0 / 5.0, 1 reviews.
What's this?
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Not fault of Parts Select - WARNING you cannot fix dishwasher with this part.
This is NOT a complaint about Parts Select (GE however has some packaging issues to resolve). It may become a complaint of Parts Select if not resolved to my full refund.
Unable to repair with provided part.
I have performed this repair in the past easily and successfully with part from GE Parts. GE Part Number: WD18 ... Read more X10052
GE Parts currently lists part number above as discontinued with a new GE Part
Number: WD35X10386. However not in stock
Found new part number locally however was missing the hose and plastic molded tubing that connects to pump and provides the actual diverter mechanism. Obviously did not purchase.
Ordered from Parts Select on 2021-12-22 and inquired if their part was complete. I was assured it was and paid for overnight shipping at approximate cost of $30.
Part arrives on Christmas Eve, a day late and incomplete. Called Part Select and was assured I would be reimbursed for full cost of part and shipping and was provided with shipping label to return incomplete part at their cost once their stock personnel verifies my claims.
I have photos of original/damaged but complete part beside new in package incomplete part for record and your use if you request.
Email Greg at:
One_US.Marine@yahoo.com
Unable to repair with provided part.
I have performed this repair in the past easily and successfully with part from GE Parts. GE Part Number: WD18 ... Read more X10052
GE Parts currently lists part number above as discontinued with a new GE Part
Number: WD35X10386. However not in stock
Found new part number locally however was missing the hose and plastic molded tubing that connects to pump and provides the actual diverter mechanism. Obviously did not purchase.
Ordered from Parts Select on 2021-12-22 and inquired if their part was complete. I was assured it was and paid for overnight shipping at approximate cost of $30.
Part arrives on Christmas Eve, a day late and incomplete. Called Part Select and was assured I would be reimbursed for full cost of part and shipping and was provided with shipping label to return incomplete part at their cost once their stock personnel verifies my claims.
I have photos of original/damaged but complete part beside new in package incomplete part for record and your use if you request.
Email Greg at:
One_US.Marine@yahoo.com
Read less
-
Paul from STEWARTSTOWN, PA
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Back to Top
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
TIM
December 19, 2017
Hello, i am confused on how the diverter valve operates (#wd35x10386). It loks like a red plastic ball inside the housing. The problem is i can only verify the bottom wash arm pumping. When and how does it divert to the upper wash arms? Thanks, tim
For model number GDF520PGD2WW
Hello Tim, Thank you for your inquiry. The diverter motor used to shift water from the bottom spray arm to the upper spray arm. The diverter valve or intake valve controls the pressure of the water going from the lower spray arm to the upper spray arm and will use a sensor controlled by the main control board to tell how much water to pump. So if it's not going from the lower spray arm to the upper spray arm it could be clogged or you could have a faulty sensor. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Chad
November 20, 2019
Water is only coming out of the diverter valve that powers the lower spray arm. Is my next step to replace the diverter valve? Do i replace it from under the dishwasher? If this doesn't work, what is my next step?Thanks
For model number GDF510PGD0BB
Hi Chad, thank you for your question. The diverter valve is not an electrically powered part in any way, so what you could do is inspect the inside of the valve to see if it is blocked by any debris that would stop the water from circulating correctly. You would have to replace the part from underneath the dishwasher. If that is not the issue I would suggest going on to checking your circulation pump. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
David
October 14, 2019
This d/w will not divert water to top rack evan when you change it to spray top rack only
For model number Gdt580ssf0ss
Hello David, thank you for writing. This may be due to either a faulty Upper Spray Arm, part number PS11729217, or Water Valve Assembly, part number PS12342758 for your model. Good luck with your repair!
Was this helpful?
Thank you for voting!
Matt
February 1, 2023
What size is the ring clamp on the diverter assembly? The rings that come with it cause a gap in the rubber seal causing it to continue to leak. Tried tightening the clamp but it easily tears the rubber seal and becomes garbage.
Thanks in advance!
For model number GDF540HMF4ES
Hi Matt,
Thank you for your question. There are 2 sizes of adjustable ring clamps that come with the diverter assembly. One measures approximately 1-3/4 inches and the other measures approximately 2-1/2 inches. If you have any questions, please let us know. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Chad
November 21, 2019
Thanks for answering my question on the diverter valve. You mention it could be the circulation pump. What part # is that? Is that something I can easily replace myself? I forgot to mention that water is coming out very strong from the front hole in the diverter valve - not sure if that helps diagnose if the pump is good or not. It just does not come out of the back hole of the diverter pump (to power the middle and upper spray arms). Thanks so much!
For model number GDF510PGD0BB
Hi Chad,
Thank you for your question. The diverter motor is used to shift water from the bottom spray arm to the upper spray arm. The diverter valve or intake valve controls the pressure of the water going from the lower spray arm to the upper spray arm and will use a sensor controlled by the main control board to tell how much water to go to the pump. So, if it is not going from the lower spray arm to the upper spray arm, it could be clogged or you could have a faulty sensor. The circulation pump, part number WD35X10385, has been discontinued by GE and you will need to contact them for information on a replacement part. Their telephone number is 1-800-626-2005. If they provide you with a part number for the replacement part, you may call us back with it and we can verify if we have it available for you. You may also be able to locate the part you need by trying the following:
Using a search engine to type your part number and see if other retailers still have this part in stock.
Visiting online stores such as eBay and finding sellers that have this part.
Trying retailers and repair stores in your local area to see if they have the part in their inventory.
Talking to a local repair technician, who may have the part you need, or may be able to repair your existing part. Here is a link to one of our videos on YouTube that you may reference on how to install a circulation pump on a dishwasher, https://www.youtube.com/watch?v=UYBYT1O730U. The dishwasher in the video may not show exactly like the one you have, but it will give you a general idea on how to install the part. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Mark
April 3, 2019
Water fills but does not circulate in the machine, i've changed the main computer board. The pump drains the machine when cycle is stopped.
For model number GDF510PGD1ww
Hello Mark, thank you for your question. We would recommend checking the diverter and circulation pump. The diverter motor used to shift water from the bottom spray arm to the upper spray arm. The diverter valve or intake valve controls the pressure of the water going from the lower spray arm to the upper spray arm and will use a sensor controlled by the main control board to tell how much water to pump. So if it's not going from the lower spray arm to the upper spray arm it could be clogged or you could have a faulty sensor. If the board was replaced and the unit is still not circulating the water, the circ pump might be the issue. Unfortunately, that part has been discontinued by the manufacturer. I hope this helps!
Was this helpful?
Thank you for voting!
Dale
May 9, 2019
My upper rack arm does not seem to be spin any longer. I had a repair tech come out and he says it's the diverter valve wd35x10386 needing replacing. He diagnosed that by just seeing the arm not spinning. Is that all i need to order is simply a new valve kit?
For model number GDT680SSH2SS
Hello Dale, thank you for inquiring. You should first check to see if the Pump is clogged up, because if it is then it won't put out enough pressure to operate properly. For your model the Wash Pump Kit is part PS12113191. This Diverter Assembly part PS7783379 may also be the cause.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Back to Top
You May Also Need
?
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS7783379
Manufacturer Part Number: WD35X10386
Manufacturer Part Number: WD35X10386
Brand
Model Number
Description
Back to Top
DIVERTER Assembly KIT
$
93.34
On Order
✖
Stock Status
In Stock
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.