Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dryer wouldnt turn on
I thought the problem was electrical so I inspected the power cord and noticed a burn on the ground connection. I disconnected the wires and inside the block was melted so I replaced it making sure the connection was tight between the power cord and block. It runs no problem. I think the dryer shorted because of a loose connection.
Emily from Raleigh, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
27 of 41 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ashley
March 16, 2018
Dryer keeps shutting itself off. Upon inspecting the wires for a bad connection i discovered the l2 in the terminal block is completely melted off. The wires are still connected but not attached to the plastic. Will replacing the terminal block fix the issue?
For model number LEQ1442ES0
Hi Ashley,
Thank you for your question. If the dryer is shutting off too soon, There are some parts that you will need to check to see which ones are causing the issue. You will need to check the thermal limiter, the high limit thermostat, the control thermistor, the heating element, the rear drum bearing and the door catch. I hope this helps. Thank you and have a great day!