Average Repair Rating: 2.1 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
partselect
I could not do my repair! It took three month's to receive a package. When it arrived, it was the wrong part! Partselect would not let me re-order the CORRECT part without first getting a refund and then starting the process all over again. Plus, they want me to keep the WRONG part laying around my house for three month's just in case so
... Read moremeone wants to "INSPECT IT". BULL!! I will never use partselect again!!!
Read less
Donald from Cheyenne, WY
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Grill Assembly
Removed 2! top screws and the old assembly then inserted its replacement mindfully and tightened the 2 screws back.
AHmed from ROCKVILLE, MD
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Grille ASM is constructed of plastic and that was broken in several for unknown reasons.
Made several attempts to repair old ASM, bur all failed. REMOVE power source from microwave. Grille ASM was seemingly easy, but the bottom plastic tabs did not line up; hence the hacksaw. A Dremmal was considered, but one wrong slip and 'junk'. On the louver bend the metal guiding tab slightly so the louver stays open. Watch the bottom a
... Read morend top tabs so that they go where they belong. My tabs did not allow the unit to slide into position, also the bevel on the tabs in some cases had to be increased to allow the tab to grab the microwave. Another possible problem could be losing screws and their tapping tabs on the top of the Grille. A small screwdriver might be need to help the top slide across. Now comes the hacksaw and several fittings. Making several small cuts on the tab taking just little at a time will preserve the tabs strength. These tabs are light duty, but they have a big job. Eventually the Grille ASM will slide across until the screw holes on top align. Install screws, bend louver guide back into position. Power up microwave and test louver operation.
Read less
Timothy from GILMER, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Coy
October 27, 2017
I am interested in ordering partselect number ps5573459, GE manufacturer part number wb07x11384 to replace a broken grill assembly on my GE microwave. Is the color of this assembly black?
For model number PVM1870DM1BB
Hi Coy,
Thank you for your question. This part is actually almond in color. I have linked the correct black grille down below for you. Good luck with your repair.