This authentic OEM black touch-up paint is specifically designed for repairing minor scratches, chips, or blemishes on your kitchen appliances. The bottle contains 16ml or 0.6oz of black paint and has an applicator brush under the cap, the same way a nail polish bottle is designed. Restoring these visible damages is important because cracked or chipped surfaces can become a breeding ground for dirt and bacteria. If your existing bottle of paint has a thick or clumpy consistency, do not use it. Remember to shake the bottle before applying the paint to your appliance. Please keep in mind that this bottle is sold individually.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Danys
November 11, 2019
Hi, what would you recommend for black touch up paint for a Kenmore side by side fridge. It is a glossy black finish. Thanks
For model number 79572129210
Hello Danys, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11727841. Hope this helps!
Hi, what would you recommend for black touch up paint for a Kenmore side by side fridge, elite trio24.8 cu ft., black finish. Thanks
For model number 463677609
Hello Chris,
Thank you for your question. The black touch up paint we suggest is under part PS11727841 for your model. We hope this helps.
Was this helpful?
Thank you for voting!
Mike
June 7, 2019
Why would water be running out of the ice maker on every cycle? I have the ice maker out but there is nothing obvious except some of the black paint is coming out of where the water fills into
For model number ET18HMXXW00
Hi Mike, thank you for your question. There are two parts that you should check for this issue. The first part to test would be your water inlet valve. The valve has two solenoids that control either the dispenser or the ice maker. Even if your dispenser is working the ice maker solenoid may not be and vise versa. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. If that part is testing correctly then you should look into your ice maker being the issue. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Janis
March 28, 2023
Whirlpool range Model WEE730HODSO Series R44516395. Need black touch up paint for the control panel that goes around the knobs, clock etc
For model number WEE730HODSO
Hello Janis, thank you for the question. The compatible touch-up paint you are looking for is part number PS385141. We hope this is helpful!