Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
David S - December 10, 2018
Verified Purchase
Ordered the wrong part
I ordered the orifice spud and replaced that part and it made no difference. I should have ordered the igniter.
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
TOM
January 29, 2019
I need the propane orfice 119l for this range. Part was dropped and lost during conversion.
For model number JGB860SEJ6SS
Hello, thank you for inquiring! Unfortunately we do not have any information on the 119L number, but we can give you the specifics on where each orifice goes to assist you in determining which is correct for you! PS11758967 is the front left, PS3650580 is the back left, PS954100 is the middle (the part title says it is for the left rear, however your model specifically states it goes in the middle), PS240692 is the back right, and PS240683 is the front right. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
David
November 9, 2023
I need to convert this model from LP back to Ng.
For model number Model JGB720EEJ1ES
Hello David, thank you for your inquiry. In order to convert your model from LP to natural gas, you may require replacing the orifices for your model and adjusting the pressure regulator. To adjust the pressure regulator: Use an adjustable wrench to unscrew the hex-nut cap. Remove the protective plastic cap off the threaded metal cap. Turn the metal cap counter-clockwise so the type of gas being converted to is displayed and replace the protective plastic cover. Screw the hex-nut cap back into the regulator. The orifices do not come separately. They come with the orifice holders. Following is the list of the orifice holder with their respective location:
1. The orifice holder, part number PS11729117, for the left front burner.
2. The orifice holder, part number PS11773941, for the right front burner.
3. The orifice holder, part number PS11729118, for the left rear burner.
4. The orifice holder, part number PS11729121, for the right rear burner.
5. The orifice holder, part number PS11771873, for the center burner.
Glad to be of assistance!
I need to convert this range back to natural gas from its current LP gas set up. Which parts do i need?
For model number PGB930SEJ5
Hi Chris, Thank you for reaching out. To convert the stove top you will need to replace the Spuds. The oven you will just need to adjust the pin on the Oven Valve. We hope this helps!
Converting pgs920sef5ss lp to natural gas what parts are necessary?
For model number PGS920SEF5SS
Hello, thank you for inquiring. On your model there are three different Orifice Spuds for natural gas. Orifice Spud part PS6447635 (one), part PS6447634 (three), and part PS3650580 (one). We hope this helps.
Was this helpful?
Thank you for voting!
Rich
November 25, 2021
I'm converting my stove from LP back to natural gas and need part numbers for the spuds please. I see that there are 7 different ones (a total of 8) but can't determine the proper part numbers. Thanks much. Rich
For model number CGS985SET1SS
Hello Rich , thank you for your question. On your model there are three different Orifice Spuds for natural gas. Orifice Spud part PS6447635 (one), part PS6447634 (three), and part PS3650580 (one). We hope this helps.
Was this helpful?
Thank you for voting!
Kelly
March 19, 2023
I need the parts to convert this stove and oven back to natural gas.
For model number jgbs66rek3ss
Hello Kelly, thank you for your question. To go back to Natural from Lp gas, you need to replace the Tubing as the orifices are included and only sold that way. The Central holder is PS11736368, Right Front PS11736369, Right Rear PS11729119, Left Rear PS11736377, Left Front PS11729118. We hope this helps.
I lost the natural gas jets to convert back to natural gas from lp. Do you have them or replacement parts? Thanks
For model number PGB995SETISS
Hello Wayne, thank you for your question. To change the unit back to Natural Gas the orifice holder assemblies would have to be replaced. Those are ORIFICE HOLDER Part Number: PS4704187, ORIFICE HOLDER Part Number: PS4704185, ORIFICE HOLDER LF Part Number: PS3654162, ORIFICE HOLDER Liner OR lower Part Number: PS1481270, and ORIFICE HOLDER Part Number: PS4704186 for the top burners. And for the oven you would have to replace ELBOW BAKE UPPER Part Number: PS8754708, ELBOW BAKE LOWER Part Number: PS8754709 and ELBOW DUAL CAVITY Part Number: PS8754723. I hope this helps.