Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
William B - July 2, 2020
Verified Purchase
works as it should.
very pleased with pump and service
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris
December 11, 2019
My washer starts filling, but the water drains out. If i unplug it it fills properly. It will work fine for a couple of loads, then you have to unplug it again. Is the drain pump sticking open?
For model number gud277essj0ww
Hello Chris, thank you for your question. We would recommend testing/replacing the water inlet valve, drain pump and the water level pressure switch. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Glenn
October 10, 2022
Drain pump does not engage or pump the tub empty. The pump spins freely and the magnet on the rotor can be felt to be working through the plastic housing. Is the outer electromagnet known to fail? I cleaned the rust off of it and reinstalled yet it still does not work.
For model number GTYW460BMMWW
Hello Glenn, thank you for your question. According to our research on the model, the Drain Pump appears to be faulty and you may need to replace it. We hope this information is useful.
Was this helpful?
Thank you for voting!
Alan
June 8, 2024
Washer wont spin or change cycles it clicks by lid switch which I replaced today what should I do next?
For model number Gud27essm1ww
Hi Alan, thank you for getting in touch. Based on the description that you have provided, we would recommend replacing the user interface board, part number PS12342920, to fix the issue. We hope this solves your problem!