We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Barma Glenn
March 3, 2020
How do you replace the baking element in this oven.
For model number JB400DP1BB
Hello Barma, thank you for your question. This element is located at the bottom of the oven under the floor of the oven. We do not currently have a video on this element but here are some steps to install the new element. First disconnect power to the appliance. Pull appliance out from the wall so left side is exposed.Next remove cooktop. Remove the outer side panel by removing the screws. There s also one hidden screw inside front of drawer section. Remove side insulation retainer and unhook the wire insulation retainers at the top. Disconnect hidden element ground wire and unplug the element. Inside the oven cavity, remove the screw in the lower left corner. Slide the element out from under oven. when reinstalling, make sure the bottom insulation is fully covering the bottom of the base module. Slide the hidden bake assembly in from the side, being careful not to move the insulation. Reconnect the side insulation retainer and element ground wire. Reconnect screw at lower left inside oven cavity. Plug the hidden element wire harness into element terminals. Reattach outer side panel and cooktop. Hope this helps!