Make sure you haven't got the discount earlier.
Rear Drum Seal Kit 279408
Rated by 26 customers
Easy
1- 2 hours
Ratings submitted by customers like you who bought this part.
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Rear Drum Seal Kit Specifications
How Buying OEM Parts Can Save You Time and Money
-
5 Stars
-
4 Stars
-
3 Stars
-
2 Stars
-
1 Star
- < Prev
- 1
- Next >
- < Prev
- 1
- Next >
- < Prev
- 1
- 2
- 3
- Next >
-
Ed from SEBEKA, MN
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers
-
ludwig from EDISON, NJ
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers
-
s. from WALNUT CREEK, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers, Socket set
-
Walter from Memphis, TN
-
Difficulty Level:Easy
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Screw drivers, Socket set, Wrench set
The tumbler seal had rotted away, the drum support rollers were frozen and the belt had broken. My husband did most of the work. I assisted, this was a 2 man job. We removed the old seal glue with Goo Gone, we put the new ... Read more seal on with both of us working on it using clothes pins. Then we glued the new seal with one of us holding the seal up while the other put the glue under it. My husband replaced the drum support rollers, got the idler pulley ready and put the belt around the drum. He lifted and I guided the tumbler (drum) into position. I held the drum while he installed the idler pulley assembly. I kept holding the drum while he got the front panel, put it in position and re-connected the electrical wires on it. Once we had that done he was able to install the front panel. Then came the moment for the test drive, and what do you know but it worked!! We didn't have to spend $$ for a new dryer, it cost us some time (probably around 5 hours total, taking apart, ordering parts and putting together), and a little over $100!! We were happy!
-
Vicki from Santa Maria, CA
-
Difficulty Level:Easy
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Screw drivers, Socket set
-
John from East Rockway, NY
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
-
John from Semmes, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
After examining drum slides and rear drum bearing, determined that all should be replaced due to excessive wear. Drum slides were the chief cause of the squealing, and they were as simple to replace as removing 4 nut drive screws, pulling off the old parts, and replacing with new. The drum bearing ... Read more had to be coaxed out by tapping with a screwdriver, but the old was just able to be pushed in. All parts came with instructions, so the repair was easy. And no more squealing!
-
Jeanne from Doylestown, PA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
-
Lawrence from Cedar Grove, NJ
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
-
Harald from Port Washington, NY
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Socket set, Wrench (Adjustable)
- < Prev
- 1
- 2
- 3
- Next >
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
2 people found this helpful.
1 person found this helpful.
- < Prev
- 1
- Next >
Manufacturer Part Number: 279408
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.