We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Shelia
May 23, 2019
Can you tell me how to remove and readjust the plastic dividers in the freezer? I wish that info had been included in the instruction manual.
For model number WRB322DMBW
Hi Sheila, thank you for your question. Unfortunately we are not your manufacturer here. However it looks like at the back of that part it is clipped in. You will have to unclip it from there and then you should be able to pull it out of the wire drawer. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Michael
August 30, 2017
I'm a returning customer.On my refrigerator, I have twice replaced the center rail because it has broken, and now think it needs a vertical support to transfer some of the weight — of the shelf, the two crispers suspended from it, and the contents. My recollection is that there is such a piece, but I don't see it on the diagrams. Please advise.
For model number gb2fhdxwq01
Hi Michael,
Thank you for the question. I am not showing a vertical part that will support the crisper frame and take weight off the rail but there is a Crisper Frame Brace that goes across the front of the shelf, This is to stabilize the shelf so that it will not bend and break. This part may need to be replaced or installed if you do not have one currently.
Hope this helps!