Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
David C - April 16, 2019
Verified Purchase
$1.00 Less than my local distributor.
I guess GE had to order more from China or something. After waiting 5 weeks thru my local Portland, Or. area distributor I cancelled the order and had this one in 3 days. Slightly smaller diamator than the original but works just fine!!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Bake element installation, old one was broken and arcing
The package arrived with the bake element and two terminal screws.
It looks like this replacement would fit a number of different models made by GE. The mounting plate has a number of mounting holes to fasten the element to the oven cavity back plane. The leads are shorter and spaced closer together. The part I received did not
... Read more match the one pictured on this site.
1. Unplug range 2. Open oven door and remove racks by sliding back and lifting out. 3. Loosen and remove the two element mounting screws. 4. At the back of the unit, remove the black cover by loosening and removing three screws, on at the bottom and two at the top. 5. Loosen and remove the two terminal screws and discard them. 6. At the front of the range, lift out and remove the old element. Insert the new element. 7. Position the mounting plate so a pair of mounting holes match the old screw positions on the back plane. Use the old screws to secure the element. 8. At the back of the unit, bend down the leads gently if the lead terminals are not accessible with a screw driver. About 30 degrees. 9. Use the new screws to attach the wire leads to the two terminals. 10 Reattach the black cover using the original screws. 11. Plug in the unit. 12. Test by turning on the bake selector, Open the oven door. Open a window or turn on a vent 13. When the element is cherry red, all the oils used in manufacturing boil off. Turn off the unit. Allow to cool. Reposition the range and it is ready to use.
Read less
Ben from CARIBOU, ME
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.